We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 12V 1.0A AC adapter with 6.5 ft cord

WAWEIS

WAWEIS SF-889 12V 1.0A AC Adapter 6.5 Ft

SKU CH-D1RP-XF2BV MPN SF-889

A 12V 1.0A AC adapter with 6.5 ft cord, 100-240V input and FCC, CE, RoHS certifications

  • World-wide 100-240 VAC input works across regions
  • 5 ft cord length gives flexible placement
  • FCC CE RoHS certified for regulated safety
  • Over-current over-voltage short-circuit protection guards equipment
  • 12 V 1.0 A output matches original device specs

12 V 1.0 A Replacement Power Adapter

The WAWEIS SF-889 is a 12 volt 1.0 amp AC-to-DC adapter built to replace the original charger for compatible devices. It accepts a worldwide input range of 100 to 240 VAC at 50 or 60 Hz and supplies a regulated 12.0 VDC output. A 6.5 ft power cord provides flexible placement on a desk or wall outlet. Integrated protection circuits guard against over-current, over-voltage, short-circuit and total power faults.

Suitable for IP Camera and Audio Video Units

This adapter suits owners of the Sharp XKD-C1000IC12.0-12W IP camera or similar audio/video equipment that require a 12 V 1.0 A centre-positive supply with the matching barrel connector. It also serves as a direct replacement for any device listed under model SF-889 or SF889 that draws up to 1000 mA. Buyers whose equipment demands a higher current, a different voltage or a non-standard connector should look at another power supply.

6.5 ft Total Cord Length Decides Fit

The single specification that decides whether this is the right part is the 6.5 ft total cord length combined with the fixed 12 V 1.0 A output rating. If the installation point is farther from the mains socket than this length allows, or if the device needs more than 1.0 A at 12 V, the adapter will not work. Verify both the required voltage and the physical reach before ordering.

Highlights

  • World-wide 100-240 VAC input works across regions
  • 5 ft cord length gives flexible placement
  • FCC CE RoHS certified for regulated safety
  • Over-current over-voltage short-circuit protection guards equipment
  • 12 V 1.0 A output matches original device specs

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the adapter is delivering the rated 12.0 V 1.0 A after I plug it in?

Measure the DC output with a multimeter set to DC volts; it should read 12.0 V under load, and the connector centre pin must be positive as marked on the label.

What comes in the box and what must I supply myself?

The package contains the SF-889 adapter unit with its attached 6.5 Ft DC cord and the detachable AC mains lead; you only need a standard wall socket.

Which version should I choose if my device requires 12 V 1 A and a 6.5 Ft cable?

The single listed SF-889 model provides exactly 12 V 1.0 A with a 6.5 Ft cord, so it matches those requirements directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.