WAWEIS
WAWEIS LE-9702B-01 19V 3.16A 60W 3.42A 65W laptop AC adapter
A 19 V AC adapter delivering 3.16 A at 60 W and 3.42 A at 65 W with a 10 ft cord, worldwide 100-240 V input, and FCC, CE, RoHS certifications
- Worldwide 100-240V input works across regions
- 10 ft total cord length gives flexible placement
- Four safety protections guard against electrical faults
- FCC, CE and RoHS certifications confirm compliance
- 100 % OEM compatible replacement for listed models
19 V 60 W and 65 W adapter for ViewPad 100
The WAWEIS LE-9702B-01 is a replacement AC adapter built for the Viewsonic ViewPad 100 series. It delivers 19 V at 3.16 A for 60 W and 3.42 A for 65 W, matching the original charger specifications. Worldwide input of 100-240 VAC at 50/60 Hz lets it work on mains power in any region.
Sustained output with multiple safety protections
Over-current, over-voltage, short-circuit and total-power protection circuits operate continuously during long charging sessions. A smart chip adds overheating protection while high-quality wires and isolation materials reduce interference. The unit is certified to FCC, CE and RoHS standards and uses 100 % new components.
Check barrel connector polarity
Verify that the ViewPad 100 requires a 19 V centre-positive barrel connector before ordering. The fixed 10 ft power cord sets the maximum distance from the wall outlet to the device. Ensure the laptop’s charging port and voltage rating match the adapter’s 19 V output.
Highlights
- Worldwide 100-240V input works across regions
- 10 ft total cord length gives flexible placement
- Four safety protections guard against electrical faults
- FCC, CE and RoHS certifications confirm compliance
- 100 % OEM compatible replacement for listed models
Specifications
No published specifications for this item yet.
Questions about this item
Does the WAWEIS LE-9702B-01 adapter run silently without a fan during all-day use?
Yes, this 60W to 65W power supply has no fan and operates silently, relying on passive cooling and built-in overheating protection.
Which wall-plug cable must I already have to connect the WAWEIS LE-9702B-01 to UK mains power?
You need a standard IEC C7 two-pin mains lead; the brick includes a 10 ft AC cord with a North American plug, so a UK C7 cable is required separately.
Will the WAWEIS LE-9702B-01 safely charge my original ViewPad 100 battery without over-voltage risk?
Yes, it matches the original 19 V 3.16 A or 3.42 A output and includes over-voltage, over-current and short-circuit protection for full OEM compatibility.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



