WAWEIS
WAWEIS AC/DC Adapter for AKG WMS SR40 SR45 SR40S Stationary Receiver
Replacement AC adapter for AKG WMS SR40, SR45 and SR45 stationary receivers with 100-240V input, 6.5 ft cord and FCC, CE, RoHS certifications
- World-wide 100-240 V input suits global mains
- 5 ft total cord length gives flexible placement
- FCC, CE and RoHS certified for verified safety
- Over-current, over-voltage and short-circuit protection built in
- 100 % compatible replacement for AKG WMS SR40, SR45, SR40S
Replacement Adapter for AKG WMS Receivers
This WAWEIS AC/DC adapter replaces the original power supply for AKG WMS SR40, SR45 and SR40S stationary receivers. It delivers world-wide input voltage from 100 to 240 VAC at 50 or 60 Hz. The unit is supplied new with a 6.5 Ft power cord and carries FCC, CE and RoHS certifications. Safety features include over-current, over-voltage, short-circuit and total power protection.
Upgrade from a Lost or Failing Original Supply
The adapter is a direct replacement when the factory charger is lost, damaged or no longer holds a stable output. Built-in overload, over-charge, over-discharge and overheating protections guard the receiver during continuous operation. The jump is worth it whenever the original unit shows intermittent power, physical cable wear or has been misplaced during touring or installation work.
Check Connector Fit and Input Rating Before Ordering
Verify that the receiver model matches the SR40, SR45 or SR40S series listed in the compatibility data. Confirm the device requires a 100-240 VAC input so the adapter’s world-wide range is suitable. Ensure the 6.5 Ft cord length reaches the intended mains outlet without strain. Buyers who need a different connector type or a voltage outside this range should look for an alternative supply.
Highlights
- World-wide 100-240 V input suits global mains
- 5 ft total cord length gives flexible placement
- FCC, CE and RoHS certified for verified safety
- Over-current, over-voltage and short-circuit protection built in
- 100 % compatible replacement for AKG WMS SR40, SR45, SR40S
Specifications
No published specifications for this item yet.
Questions about this item
Does the 6.5 ft power cord reach a wall socket from a rack-mounted SR40S?
The adapter includes a 6.5 ft cord plus a detachable mains lead, giving enough length for most rack-to-wall runs.
How do I connect the adapter to the SR45 without damaging the DC jack?
Align the barrel plug centre-positive, push straight in until it seats firmly — forcing it at an angle bends the inner pin.
When should I replace the adapter if the SR40 shows intermittent power?
Replace it if the LED flickers, the brick overheats, or the output drops under load — typically after several years of continuous use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



