WAWEIS
WAWEIS AC/DC Adapter 50.4V 1.5A 10ft Cord
A 50.4 V 1.5 A charger with a 10 ft cord, worldwide 100-240 V input and FCC, CE and RoHS certification
- World-wide 100-240 V input works anywhere
- 10 ft power cord gives flexible placement
- Over-current, over-voltage and short-circuit protection safeguards equipment
- FCC, CE and RoHS certified for safety compliance
- 100 % compatible replacement for listed vacuum models
Replacement 50.4V 1.5A Charger
This AC adapter replaces the original power supply for Hide-A-Hose 9965 CX1000 44V Li-ion central vacuum systems and the Winkind C223-2000 cordless electric nozzle. It delivers 50.4V at 1.5A through a 10ft power cord. The unit accepts worldwide 100-240VAC 50/60Hz input.
Suits owners of compatible central vacuums
Homeowners needing a direct replacement for the listed Hide-A-Hose or Winkind models will find this charger matches the required voltage and connector. Buyers with different vacuum brands, other battery voltages, or proprietary charging docks cannot use this adapter.
Output fixed at 50.4V 1.5A
The single specification that decides compatibility is the 50.4V 1.5A DC output. Your device must require exactly this voltage and current rating. The 10ft cord length and 100-240VAC input are secondary conveniences.
Highlights
- World-wide 100-240 V input works anywhere
- 10 ft power cord gives flexible placement
- Over-current, over-voltage and short-circuit protection safeguards equipment
- FCC, CE and RoHS certified for safety compliance
- 100 % compatible replacement for listed vacuum models
Specifications
No published specifications for this item yet.
Questions about this item
What connector does the 50.4V 1.5A adapter use to attach to the Hide-A-Hose 9965 central vacuum?
The adapter is listed as a direct replacement for the Hide-A-Hose 9965 and Winkind C223-2000 PN 10201026, using the original device connector for the 44V Li-ion battery system.
What is the correct order to connect the 10ft cord to avoid triggering the short-circuit protection?
Plug the adapter output into the vacuum charging port first, then connect the 100-240VAC 50/60Hz mains plug; reversing this sequence can trip the over-current and short-circuit safeguards.
When should the 10ft power cord be replaced on this FCC CE RoHS certified charger?
Replace the cord if the insulation shows cracks, the plug pins are bent, or the charger intermittently loses power during the 50.4V 1.5A charging cycle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



