WAWEIS
WAWEIS AC/DC Adapter 12V 1A 6.5 Ft
A 12V 1A AC/DC adapter with a 6.5 ft cord, worldwide 100-240V input, and FCC, CE and RoHS certification
- Worldwide 100-240VAC input works anywhere
- 12V 1A output matches original charger spec
- 5 ft total cord length adds placement flexibility
- FCC CE RoHS certified with multiple safety protections
- 100% OEM compatible replacement for listed Netgear models
What this adapter powers
This 12 V 1 A AC/DC adapter replaces the original Netgear supply for models including P/N 330-10129-01, DV-1280-3 and DV12803. It accepts a worldwide 100-240 VAC 50/60 Hz input and delivers a regulated 12 VDC 1000 mA output through a 6.5 ft power cord.
Capacity and headroom
The unit supplies up to 12 watts of continuous power, enough for the listed Netgear devices under normal load. Over-current, over-voltage, short-circuit and total-power protection circuits shut the output down before damage can occur, so the adapter runs out of headroom only when the connected device draws more than its rated 1 ampere.
Build fit and freedoms
A standard IEC mains lead plugs into the adapter body, and the 6.5 ft DC cable reaches nearby outlets without an extension strip. FCC, CE and RoHS certifications confirm compliance for office or home use, while the compact brick leaves desk space free and adds no fan noise to the installation.
Highlights
- Worldwide 100-240VAC input works anywhere
- 12V 1A output matches original charger spec
- 5 ft total cord length adds placement flexibility
- FCC CE RoHS certified with multiple safety protections
- 100% OEM compatible replacement for listed Netgear models
Specifications
No published specifications for this item yet.
Questions about this item
Will this 12V 1A adapter run on the same 100-240VAC 50/60Hz mains supply as my older Netgear unit?
Yes, the adapter accepts a world-wide input range of 100-240VAC at 50 or 60 Hz, matching the voltage and frequency of the original Netgear power supply.
How can I confirm the adapter is delivering the correct 12VDC 1A output after I plug it in?
The unit includes over-current, over-voltage, short-circuit and total-power protection; a steady LED on the connector (if present) and normal device operation indicate the 12V 1000mA output is within spec.
Does the 6.5 ft cord come attached, or do I need to buy a separate AC cable?
The 6.5 ft power cord is permanently attached to the adapter body, so no separate AC cable is required — only the correct DC tip for your Netgear model.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



