WAWEIS
WAWEIS AC adapter for MSI Bravo 15 A4DDR/RX 5500M 19.5V 9.23A
Replacement 19.5V 9.23A charger with 10 ft cord and FCC, CE, RoHS certification for MSI Bravo 15 A4DDR/RX 5500M
- World-wide 100-240 V input lets you charge anywhere
- 10 ft total cord length gives flexible outlet placement
- Multiple safety protections guard against over-current, over-voltage and short circuits
- FCC, CE and RoHS certifications confirm compliance with safety standards
- 100 % compatible replacement for MSI Bravo 15 A4DDR/RX 5500M 19.5 V 9.23 A
AC Adapter for MSI Bravo 15
This WAWEIS AC adapter delivers 19.5V at 9.23A for the MSI Bravo 15 A4DDR and RX 5500M models. It accepts a world-wide input range of 100 to 240VAC at 50 or 60Hz. The unit includes a total 10 ft long power cord for flexible placement.
Replaces a failed or lost original charger
The adapter is built as a direct replacement that matches the original voltage and current specifications. It is worth the switch when the factory charger no longer holds a charge, shows cable damage, or has been misplaced. Safety circuits provide over-current, over-voltage, short-circuit and total-power protection.
Fits into a laptop power setup
The brick connects to any standard mains outlet thanks to the 100 to 240VAC input and ships with a 10 ft cord that reaches distant sockets. It frees you from hunting for a proprietary connector by using the exact tip required by the MSI Bravo 15 series. Certifications include FCC, CE and RoHS.
Highlights
- World-wide 100-240 V input lets you charge anywhere
- 10 ft total cord length gives flexible outlet placement
- Multiple safety protections guard against over-current, over-voltage and short circuits
- FCC, CE and RoHS certifications confirm compliance with safety standards
- 100 % compatible replacement for MSI Bravo 15 A4DDR/RX 5500M 19.5 V 9.23 A
Specifications
No published specifications for this item yet.
Questions about this item
What is the total length of the power cord included with this 19.5V 9.23A adapter?
The charger and adapter have a total 10 ft long power cord, combining the mains cable and the DC output lead into one continuous length.
How do I install the adapter, and which step do people often get wrong?
Plug the IEC mains lead into the brick, connect the barrel tip to the laptop, then switch on the wall socket; the common mistake is powering the wall outlet before the tip is fully seated.
When will the 10 ft mains cable need replacement?
Replace the cable if the insulation cracks, the plug pins bend, or the brick shows overheating protection trips; the 12 month warranty covers early failures.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



