WAWEIS
WAWEIS AC adapter for iHome2go KSAD0750200W1UV-1 9IH509 B 7.5VDC
Replacement AC adapter delivers 7.5 VDC for iHome2go speaker systems with 6.5 ft cord and worldwide 100-240 VAC input
- World-wide 100-240 VAC input suits any mains supply
- Six-and-a-half-foot cord gives flexible placement
- Over-current, over-voltage and short-circuit protection safeguards equipment
- FCC, CE and RoHS certified for regulatory compliance
- 100 % compatible replacement for iHome2go KSAD0750200W1UV-1 9IH509 B 7.5 VDC
What this adapter powers
This WAWEIS AC adapter replaces the original charger for the iHome2go KSAD0750200W1UV-1 9IH509 B speaker system. It delivers a regulated 7.5 VDC output and accepts worldwide mains input from 100 to 240 VAC at 50 or 60 Hz. The unit is built with new components and carries FCC, CE and RoHS certifications. It is intended for owners who need a direct replacement for a lost or damaged power supply.
What the cable and protections change
A 6.5 ft power cord lets the adapter reach distant wall sockets without an extension lead. Integrated safeguards include over-current protection, over-voltage protection, short-circuit protection and total power protection. A smart chip adds over-charge, over-discharge and overheating protection while anti-interference materials improve isolation. Together these features protect the connected speaker system from mains irregularities.
Capacity and headroom
The adapter supplies the specified 7.5 VDC required by the iHome2go unit, so normal playback and charging operate without voltage drop. It is not designed for devices that demand a different voltage or higher current than the original specification. Users with multi-device charging stations or higher-wattage audio equipment will need a separate power solution.
Highlights
- World-wide 100-240 VAC input suits any mains supply
- Six-and-a-half-foot cord gives flexible placement
- Over-current, over-voltage and short-circuit protection safeguards equipment
- FCC, CE and RoHS certified for regulatory compliance
- 100 % compatible replacement for iHome2go KSAD0750200W1UV-1 9IH509 B 7.5 VDC
Specifications
No published specifications for this item yet.
Questions about this item
Will the 6.5 ft power cord need replacing after daily use?
The cord is fixed to the adapter; if it frays or the plug loosens the whole unit must be swapped.
What limits continuous operation of the 7.5 VDC output?
Over-current, over-voltage and short-circuit protection will shut the adapter down before components overheat.
How much heat or noise does the adapter produce when left on all day?
No fan is fitted so it runs silently; the enclosure warms to hand-hot under full load but stays within FCC, CE and RoHS limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
