WAWEIS
WAWEIS AC Adapter 12V .4A 1A 5.5mm 2.1mm 6.5 Ft
A 12V power supply delivering .4A to 1A with a 5.5mm by 2.1mm DC plug and a 6.5 Ft cord
- World-wide 100–240 V input suits travel
- 5 ft cord reaches distant sockets easily
- 12 V output at 0.4 A or 1 A powers compatible devices
- FCC, CE and RoHS certified for safety compliance
- Over-current, over-voltage and short-circuit protection built in
Universal 12 V Power Adapter
This 12 V AC adapter delivers 0.4 A to 1 A for small electronics that use a 5.5 mm × 2.1 mm barrel connector. The unit accepts 100–240 V AC at 50/60 Hz, making it suitable for worldwide mains supply. A 6.5 ft total cord length provides flexible placement. Safety certifications include FCC, CE and RoHS.
Ideal For Low-Draw 12 V Devices
It suits routers, security cameras, LED strips or similar equipment rated for 12 V and up to 1 A. Built-in protections cover over-current, over-voltage, short-circuit and total-power events. Buyers whose gear needs more than 1 A or a different output voltage should look at a higher-rated supply. The fixed barrel tip cannot be swapped for other connector sizes.
Capacity And Headroom
The adapter comfortably runs loads up to its 1 A maximum, such as a typical 12 V 0.5 A network device. Continuous operation near the 1 A limit leaves little thermal margin, so sustained full-load use may warm the case. It cannot power equipment requiring 2 A or higher, nor devices that need 5 V, 9 V or adjustable outputs.
Highlights
- World-wide 100–240 V input suits travel
- 5 ft cord reaches distant sockets easily
- 12 V output at 0.4 A or 1 A powers compatible devices
- FCC, CE and RoHS certified for safety compliance
- Over-current, over-voltage and short-circuit protection built in
Specifications
No published specifications for this item yet.
Questions about this item
Does my device need a 12 V DC input with a 5.5 mm × 2.1 mm barrel connector to use this adapter?
Yes — the adapter supplies 12 V DC through a 5.5 mm outer / 2.1 mm inner barrel plug, so the device must accept that voltage and connector.
Can I keep using my existing IEC C7 figure-8 mains lead with this unit?
The adapter has a fixed mains cord, so the existing lead cannot be used; plug the supplied cord directly into a 100–240 VAC 50/60 Hz outlet.
How can I verify the adapter is delivering power after I connect it?
The 6.5 ft cable lets you reach the outlet; once plugged in, the device should show its normal charging indicator and operate without triggering the built-in over-current, over-voltage or short-circuit protections.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



