WAWEIS
WAWEIS AC Adapter 12V-15V 10ft for Direct TV AIM 1.5
Replacement AC adapter delivers 12V-15V power to Direct TV AIM 1.5 meters with a 10 ft cord and FCC, CE, RoHS certification
- World-wide 100-240 VAC 50/60 Hz input
- 10 ft power cord gives flexible placement
- FCC CE RoHS certified for safety compliance
- Multiple protections: over-current over-voltage short-circuit
- 100 % compatible with Direct TV AIM 1.5
AC Adapter for DirectTV AIM 1.5 Meter
This AC adapter replaces the original power supply for the DirectTV AIM 1.5 Satellite Advanced Installation Meter. It delivers 12V-15V output with a 10 ft power cord for flexible placement during installations. The unit accepts 100-240VAC input at 50/60Hz for worldwide use.
Upgrade from Damaged or Lost Original Chargers
Technicians replace worn, lost, or faulty OEM adapters such as the DTV UP-1222000 or Trilithic ATS065T-P150 with this unit. The jump is worth it when the original cable is frayed, the connector is loose, or the meter fails to power on reliably in the field.
Simple Plug-In Installation with Built-In Safeguards
Connect the barrel plug to the meter and the IEC cord to mains power; no tools or configuration are required. Over-current, over-voltage, short-circuit, and total-power protections guard the meter against surges. FCC, CE, and RoHS certifications confirm compliance with safety standards.
Highlights
- World-wide 100-240 VAC 50/60 Hz input
- 10 ft power cord gives flexible placement
- FCC CE RoHS certified for safety compliance
- Multiple protections: over-current over-voltage short-circuit
- 100 % compatible with Direct TV AIM 1.5
Specifications
No published specifications for this item yet.
Questions about this item
What plug does the WAWEIS adapter use to connect to the Direct TV AIM 1.5 meter?
The adapter is built as a direct replacement for the AIM 1.5, AIM01R2-12, DTV UP-1222000 and Trilithic ATS065T-P150, so its output connector matches the meter's original DC input jack.
Which step do installers most often miss when fitting this 10 ft power supply?
They forget to verify that the wall outlet supplies 100-240 VAC at 50/60 Hz before plugging in the adapter, which is required for the wide-range input to operate correctly.
When should the 12 V-15 V adapter be replaced?
Replace it if the over-current, over-voltage or short-circuit protection trips repeatedly, if the 10 ft cord shows insulation damage, or if the meter fails to power up from a known-good outlet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



