WAWEIS
WAWEIS ac adapter 12 V 1205 GT-341-12-500D
12 V AC adapter for GLOBTEK GT-341-12-500D and PW-1205 with 100–240 V input, 6.5 ft cord and FCC, CE, RoHS certification
- World-wide 100-240 VAC input suits travel use
- 5 ft total cord length gives flexible placement
- FCC, CE and RoHS certified for regulated safety
- Over-current, over-voltage and short-circuit protection built in
- 12 V 1205 output matches original GT-341-12-500D specification
What this adapter does
The WAWEIS 12 V 1205 GT-341-12-500D is a replacement AC adapter for laptops and devices that require 12 V DC input. It accepts 100-240 VAC at 50/60 Hz for worldwide use. The unit includes a 6.5 Ft power cord and carries FCC, CE and RoHS certifications.
When to replace the original
Swap to this adapter when the factory charger is lost, damaged or no longer holds a stable output. The jump is worth it if the original shows frayed cables, intermittent charging or overheating, and you need a direct 12 V match with the same connector polarity. Buyers who need a different voltage or a higher current rating cannot use this model.
Installation and common issues
Plug the AC cord into the adapter, connect the DC tip to the device and insert the mains plug. No drivers or configuration are required. The most frequent problems are using a tip with the wrong polarity or barrel size, and running the adapter in a confined space where the over-heating protection can trigger.
Highlights
- World-wide 100-240 VAC input suits travel use
- 5 ft total cord length gives flexible placement
- FCC, CE and RoHS certified for regulated safety
- Over-current, over-voltage and short-circuit protection built in
- 12 V 1205 output matches original GT-341-12-500D specification
Specifications
No published specifications for this item yet.
Questions about this item
What input voltage range does the WAWEIS 12 V 1205 GT-341-12-500D adapter accept?
It accepts 100-240 VAC at 50/60 Hz, so it works worldwide without a voltage converter.
How do I connect the 6.5 ft power cord correctly and avoid the common loose-connection issue?
Plug the IEC end firmly into the adapter body until it clicks, then insert the barrel tip fully into the laptop port; a partial seat causes intermittent charging.
When should I replace the power cord or the adapter itself?
Replace the cord if the insulation frays or the plug pins bend; replace the whole unit if the over-voltage, over-current or short-circuit protection trips repeatedly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



