WAWEIS
WAWEIS 8-way splitter adapter 12V 2.0A 6.5 ft
An 8-way 12 V 2.0 A splitter with 6.5 ft cable and over-current, over-voltage and short-circuit protection
- World-wide 100–240 VAC input works in any region
- Eight 12 V 2.0 A outputs power up to eight cameras from one supply
- 5 ft cord length gives flexible placement for each camera
- FCC, CE and RoHS certified for safety and environmental compliance
- Built-in over-current, over-voltage, short-circuit and total-power protection safeguards connected devices
8-way 12V splitter for multi-camera power
This adapter splits a single 12V 2.0A supply into eight DC outputs for Lorex, Q-See and Swann CCTV cameras. It accepts 100-240VAC at 50/60Hz and provides a total cable length of 6.5 ft. The unit is designed for installers who need to power up to eight cameras from one mains outlet.
Replaces eight individual wall-wart adapters
Consolidating eight separate power bricks into one splitter reduces cable clutter and frees mains sockets in recorder cabinets. The change is worthwhile when all cameras are within reach of the 6.5 ft lead and the combined draw stays within the 2.0A limit. Sites that need longer runs or higher per-camera current will not be served by this adapter.
Sustained load behaviour with protection circuits
Over-current, over-voltage, short-circuit and total-power protection engage continuously during extended operation. FCC, CE and RoHS certifications confirm compliance for permanent installation. The adapter has no battery and no smart charging logic, so it simply maintains regulated 12VDC while mains power is present.
Highlights
- World-wide 100–240 VAC input works in any region
- Eight 12 V 2.0 A outputs power up to eight cameras from one supply
- 5 ft cord length gives flexible placement for each camera
- FCC, CE and RoHS certified for safety and environmental compliance
- Built-in over-current, over-voltage, short-circuit and total-power protection safeguards connected devices
Specifications
No published specifications for this item yet.
Questions about this item
What connector type does the 8-way splitter use for each camera output?
The adapter provides eight DC barrel outputs that plug directly into compatible 12 V security cameras.
How is the unit powered and where does the 6.5 ft cord reach?
Connect the IEC mains lead to a 100-240 VAC wall socket; the 6.5 ft cord then runs to the splitter block.
Which safety features protect the cameras if a fault occurs?
Built-in over-current, over-voltage, short-circuit and total-power protection shut down the output during a fault.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



