We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 4-pin DIN connector and long power cord

WAWEIS

WAWEIS 4-Pin DIN AC Adapter for Kangaroo ePump FW7556M/09

SKU CH-0BV4-S9NKF

A 4-pin DIN AC adapter for Kangaroo ePump FW7556M/09 enteral feeding pumps with 100-240V input and a 10 ft cord

  • World-wide 100–240 VAC 50/60 Hz input works across regions
  • 10 ft total cord length gives flexible placement
  • Four safety protections guard against over-current, over-voltage, short-circuit and total-power faults
  • FCC, CE and RoHS certified for regulated compliance
  • 100 % compatible replacement for Kangaroo ePump FW7556M/09

Compatible AC Adapter

The WAWEIS 4-pin DIN AC adapter replaces the original charger for the Kangaroo ePump FW7556M/09 enteral feeding pump. It matches the SL Power and Ault Medical Kendall Covidien REF 382491 38214600 382400 specifications for direct compatibility. Medical facilities and home-care users can deploy it as a reliable power source.

Thermals Noise Power

The adapter operates on worldwide input voltage from 100 to 240 VAC at 50 or 60 Hz. Built-in safety features include over current protection, total power protection, over voltage protection and short circuit protection. A smart chip provides overheating protection while isolation materials reduce interference during continuous use.

Ten Foot Power Cord

The charger ships with a total 10 ft long power cord for flexible placement near the pump. It is manufactured with high quality materials and carries FCC, CE and RoHS certifications. The unit uses 100 percent new components and is guaranteed to meet original device specifications.

Highlights

  • World-wide 100–240 VAC 50/60 Hz input works across regions
  • 10 ft total cord length gives flexible placement
  • Four safety protections guard against over-current, over-voltage, short-circuit and total-power faults
  • FCC, CE and RoHS certified for regulated compliance
  • 100 % compatible replacement for Kangaroo ePump FW7556M/09

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 4-Pin DIN plug to the Kangaroo ePump FW7556M/09 without bending the pins?

Align the keyed 4-Pin DIN connector with the pump inlet and push straight in until seated; forcing it at an angle bends the delicate pins.

Which part of this adapter will need replacement first with daily clinical use?

The 10 ft power cord and its strain reliefs wear fastest; inspect for cracking or exposed wire and replace the whole adapter if damage appears.

What safety limit activates first if the adapter runs continuously at full load?

Over-current protection trips first, cutting output before over-voltage or thermal limits are reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.