WAWEIS
WAWEIS 4-Pin 48V 150W AC Adapter 2.75A 3.125A 10ft Cord
A 48 V, 150 W AC adapter with a 4-pin connector and 10 ft cord, certified FCC, CE and RoHS, with over-current, over-voltage and short-circuit protection
- World-wide 100-240 VAC input works across regions
- 150 W output at 48 V delivers 2.75 A and 3.125 A for demanding loads
- 10 ft total cord length gives flexible placement
- FCC, CE and RoHS certifications confirm safety compliance
- Over-current, over-voltage, short-circuit and total-power protections guard connected hardware
48V 150W AC Adapter for Delta DPSN-150JB
This 48-volt AC adapter delivers 150 watts through a four-pin connector. It replaces Delta Electronics DPSN-150JB D and DPSN-150JBD units. The unit accepts worldwide input voltage from 100 to 240 VAC at 50 or 60 Hz.
Plug-in installation with 10-foot cord
The adapter connects directly to the device's four-pin port and a standard mains outlet. A ten-foot power cord provides flexible placement. Built-in protections guard against over current, over voltage, short circuit and total power faults. The only common issue is ordering the wrong pin layout for a similar-looking model.
4-pin 48V output at 2.75A and 3.125A
This specification determines compatibility with the target hardware. The adapter supplies 48 VDC at 2.75 A and 3.125 A simultaneously. Buyers needing a different voltage, pin count or current rating cannot use this unit.
Highlights
- World-wide 100-240 VAC input works across regions
- 150 W output at 48 V delivers 2.75 A and 3.125 A for demanding loads
- 10 ft total cord length gives flexible placement
- FCC, CE and RoHS certifications confirm safety compliance
- Over-current, over-voltage, short-circuit and total-power protections guard connected hardware
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the adapter is delivering 48 V at 2.75 A after connecting it?
The green LED on the adapter body lights when the unit is powered and the output rails are within specification; a multimeter across the 4-pin connector should read 48 VDC.
What comes in the box and do I need any extra cables?
The package includes the 150 W 48 V adapter with an integrated 10 ft AC cord and the 4-pin DC plug; no additional cables are required.
My original supply is labelled DPSN-150JB D or NUA5-3480275-I1 — is this the correct replacement?
Yes, the adapter is listed as 100 % compatible with Delta Electronics DPSN-150JB D, DPSN-150JBD, 0432-01NQ000 and all NUA5-3480275 variants.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



