WAWEIS
WAWEIS 4-Pin 19V 11.75A 220W AC Adapter
19V 11.75A 220W AC adapter with 4-pin connector and 10 ft cord for compatible laptops
- World-wide 100-240 V input works across 50/60 Hz mains
- 10 ft total cable length gives flexible placement
- Four safety protections guard against over-current, over-voltage, short-circuit and total-power faults
- Certified to FCC, CE and RoHS standards for regulatory compliance
- 100 % OEM-compatible replacement for listed iBUYPOWER, Eurocom and CyberPower models
Compatible Power Replacement
This 220W AC adapter replaces the original charger for iBUYPOWER i-Series 801, Battalion 101, Eurocom P170HM models, CyberPower X7-9700 and X7-9750 laptops. It delivers 19V at 11.75A through a 4-pin connector. The unit is new and built with 100% new components.
Upgrade From Worn Units
The adapter is worth fitting when the factory brick shows frayed cables, intermittent charging or overheating. Its 10 ft power cord adds reach compared to shorter original leads. Safety circuits include over-current, over-voltage, short-circuit and total-power protection.
Capacity And Headroom
The 220W rating comfortably runs the listed 170-class and 101-series machines under full load. It operates on 100-240VAC at 50/60Hz worldwide. The supply is not suited for laptops that demand higher wattage or a different connector pin-out.
Highlights
- World-wide 100-240 V input works across 50/60 Hz mains
- 10 ft total cable length gives flexible placement
- Four safety protections guard against over-current, over-voltage, short-circuit and total-power faults
- Certified to FCC, CE and RoHS standards for regulatory compliance
- 100 % OEM-compatible replacement for listed iBUYPOWER, Eurocom and CyberPower models
Specifications
No published specifications for this item yet.
Questions about this item
Does the 4-pin connector fit my iBUYPOWER i-Series 801 or Battalion 101 laptop?
Yes, the 4-pin female connector matches the original power port on those models and on the Eurocom P170HM series.
How do I install it without damaging the pin?
Align the 4-pin plug with the laptop socket, push straight in until it seats firmly, then connect the 10 ft cord to a 100-240VAC 50/60Hz outlet.
When should I replace the 10 ft power cord?
Replace the cord if the insulation cracks, the plug gets loose, or the adapter trips its over-current, over-voltage or short-circuit protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



