WAWEIS
WAWEIS 4.5V 1A AC Adapter 4.0mm x 1.7mm Tip
Supplies 4.5 V at 1 A through a 4.0 mm × 1.7 mm tip with a 6.5 ft cord and 100–240 V input
- World-wide 100-240V input works anywhere
- 5 ft cord reaches distant outlets
- FCC, CE and RoHS certified for safety
- Multiple protections guard against over-voltage and short circuits
- 1 A output powers devices needing up to 1000 mA
Power input and connector
This WAWEIS AC adapter accepts worldwide mains voltage from 100 to 240 VAC at 50 or 60 Hz. It delivers a regulated 4.5 VDC output at up to 1 A through a 4.0 mm outer and 1.7 mm inner barrel tip with positive inside polarity. The unit replaces the original charger for compatible laptops and devices that require this exact voltage and connector size. Total cable length is 6.5 ft for flexible placement.
Protection and heat in normal use
Built-in safeguards include over-current, over-voltage, short-circuit and total-power protection to shield both the adapter and the connected device. A smart chip provides over-heating protection while anti-interference materials improve isolation during everyday charging. The adapter runs quietly with no moving parts and maintains stable output for loads from 100 mA up to the full 1000 mA rating. Certifications cover FCC, CE and RoHS compliance.
Behaviour under sustained load
Continuous operation at the rated 1 A output is supported by the overload and thermal protection circuits without shutdown in typical ambient conditions. The 6.5 ft cord allows routing away from heat sources to help long-term reliability. Buyers who need higher current or a different voltage should select another model. Units requiring a larger barrel diameter or centre-negative polarity are not compatible with this tip.
Highlights
- World-wide 100-240V input works anywhere
- 5 ft cord reaches distant outlets
- FCC, CE and RoHS certified for safety
- Multiple protections guard against over-voltage and short circuits
- 1 A output powers devices needing up to 1000 mA
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 4.0 mm x 1.7 mm tip and which polarity does it need?
The tip has a 4.0 mm outer diameter and 1.7 mm inner diameter with positive inside; plug it straight into the device's DC jack until it seats firmly.
Which parts of the 6.5 ft cord or adapter typically wear out first?
The DC cable near the tip and the strain relief at the brick are the common wear points; inspect them periodically for fraying or loose connections.
At what load does the over-current protection trip during continuous use?
The adapter is rated for 1000 mA output; the built-in over-current protection activates if the draw exceeds that 1 A limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



