WAWEIS
WAWEIS 20V AC Adapter 10 ft Cord 60W Thunderbolt Hub Compatible
A 20V 60W AC adapter with a 10 ft cord powers a Thunderbolt hub and includes FCC, CE and RoHS certifications
- Worldwide 100-240V input powers hubs anywhere
- 10 ft cord reaches distant outlets easily
- 60W charging keeps Thunderbolt hub running
- FCC CE RoHS certified for safety assurance
- Over-voltage short-circuit protection guards connected devices
Replacement 20 V 60 W Adapter
This 20 V 60 W AC adapter replaces the original supply for the Plugable USB4-HUB3A Thunderbolt 4 hub. It accepts 100-240 VAC at 50/60 Hz so it works worldwide. The unit is new and carries FCC, CE and RoHS certification. Buyers who need a higher wattage supply for other devices should look elsewhere.
10 ft Cord Plug-and-Play Install
The total cord length is 10 ft giving flexible placement without extension leads. No drivers or configuration are required; connect the barrel plug to the hub and the IEC lead to mains power. The fixed output voltage means it cannot be used with laptops or hubs that require a different voltage. Mis-wiring the polarity would trigger the short-circuit protection and prevent operation.
Sustained Load Protection Active
Over-current, over-voltage, over-power and short-circuit circuits monitor the supply continuously during extended sessions. An internal smart chip adds over-temperature protection while anti-interference isolation keeps output stable. The adapter is rated for 60 W continuous delivery so the hub can drive single 8K or dual 4K displays without throttle. Units without these safeguards may shut down under prolonged maximum load.
Highlights
- Worldwide 100-240V input powers hubs anywhere
- 10 ft cord reaches distant outlets easily
- 60W charging keeps Thunderbolt hub running
- FCC CE RoHS certified for safety assurance
- Over-voltage short-circuit protection guards connected devices
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the 20V adapter is delivering 60W charging to my Thunderbolt hub after setup?
The hub should power on and show 60W charging status; the adapter includes over-current, over-voltage, short-circuit and total-power protection that activate automatically.
What comes in the box and what must I buy separately for the 10 ft 20V adapter?
The package contains the 20V AC/DC adapter with a 10 ft power cord; the Thunderbolt hub and any device cables are sold separately.
Which version of the 20V 60W adapter matches my Plugable USB4-HUB3A hub?
This model replaces the Hoioto ADS-110DL-19-1 200100E supply and is 100% compatible with the Plugable USB4-HUB3A Thunderbolt hub.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



