WAWEIS
WAWEIS 19V 7.9A 150W 4-Pin DIN AC Adapter
Delivers 19V 7.9A 150W via 4-pin DIN for listed Gateway and FSP models with 10 ft cord and FCC, CE, RoHS certification
- World-wide 100-240 VAC input works anywhere
- 10 ft total cord length gives flexible placement
- Over-current, over-voltage and short-circuit protection safeguard hardware
- FCC, CE and RoHS certified for safety compliance
- 100 % OEM compatible with listed Gateway and FSP models
150 W 4-Pin DIN Adapter
This WAWEIS AC adapter delivers 19 V at 7.9 A for a total of 150 W through a 4-pin DIN connector. It accepts worldwide input voltage from 100 to 240 VAC at 50 or 60 Hz and includes a 10 ft power cord. Safety features include over-current, over-voltage, total-power and short-circuit protection. The unit carries FCC, CE and RoHS certifications.
Replaces Gateway and FSP Models
It replaces the Gateway 9NA1500202 and 9NA1500203 units and the FSP Group FSP150-1ADE11. The adapter also matches ADP-150CB, PA-1700-02, PA-1161-06 and part numbers 6500773 and 6500774. The jump is worth it when the original charger is lost, damaged or no longer holds a stable voltage under load.
For Gateway M350 and M675 Owners
This charger suits owners of Gateway M350, M350WVN and M675 laptops that require a 19 V 150 W 4-pin DIN supply. Buyers whose devices use a different connector, a different voltage or a lower wattage rating should look elsewhere. Users needing a USB-C or barrel-tip power source will not be served by this model.
Highlights
- World-wide 100-240 VAC input works anywhere
- 10 ft total cord length gives flexible placement
- Over-current, over-voltage and short-circuit protection safeguard hardware
- FCC, CE and RoHS certified for safety compliance
- 100 % OEM compatible with listed Gateway and FSP models
Specifications
No published specifications for this item yet.
Questions about this item
Does the 4-pin DIN connector fit the Gateway M350 and M675 charging port?
Yes, the adapter is listed as compatible with Gateway M350 and M675 models using the 4-pin DIN tip.
What is the correct order to connect the 10 ft power cord and the 4-pin DIN tip?
Attach the IEC mains lead to the adapter brick, plug the 4-pin DIN tip firmly into the laptop until it seats, then connect the mains plug to a 100-240 VAC outlet.
Which protections will trigger a shutdown that requires a mains reset on this 150 W unit?
Over-current, over-voltage, short-circuit and total-power protection will shut the adapter down; disconnect the mains for a few seconds to reset.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



