WAWEIS
WAWEIS 19V 3.42A 65W AC Adapter for Westinghouse FSP065-RAB
Replacement 19 V 3.42 A 65 W AC adapter with 10 ft cord, worldwide 100-240 V input, and FCC, CE, RoHS certification
- World-wide 100–240 V input suits travel and home use
- 10 ft power cord gives flexible desk placement
- 19 V 3.42 A 65 W output matches original charger specs
- FCC, CE and RoHS certifications confirm safety compliance
- Over-voltage, over-current, short-circuit and over-heating protections safeguard hardware
Power supply replacement
This 19 V 3.42 A adapter delivers 65 W and replaces the Westinghouse FSP065-RAB unit. It suits owners of Captiva E1701 and Viewsonic VE702 or VE702m monitors who need a direct plug-in substitute.
Build and connectivity
The brick accepts 100 to 240 V AC at 50 or 60 Hz for worldwide use. A 10 ft power cord reaches distant sockets, while the barrel connector fits the original device without adapters. Over-current, over-voltage, short-circuit and total-power protections are built in, and the unit carries FCC, CE and RoHS marks.
Thermals and consumption
The adapter draws 65 W from the mains under load and runs on a passive enclosure with no moving parts. Smart-chip thermal management and high-isolation materials keep surface temperatures low during continuous operation. Silent running makes it suitable for quiet workspaces or bedroom setups.
Highlights
- World-wide 100–240 V input suits travel and home use
- 10 ft power cord gives flexible desk placement
- 19 V 3.42 A 65 W output matches original charger specs
- FCC, CE and RoHS certifications confirm safety compliance
- Over-voltage, over-current, short-circuit and over-heating protections safeguard hardware
Specifications
No published specifications for this item yet.
Questions about this item
What input voltage range does the 19V 3.42A 65W AC adapter accept?
The adapter accepts worldwide input voltage from 100 to 240VAC at 50 or 60Hz, making it suitable for use in different regions without a voltage converter.
What physical connector and cable length does this replacement charger provide?
It comes with a total 10 ft long power cord and a DC output connector designed to fit the Westinghouse FSP065-RAB and listed compatible models such as Captiva E1701 and Viewsonic VE702.
How is the adapter installed and what common mistake should be avoided?
Plug the AC cord into a wall outlet, then connect the DC plug firmly into the device power jack; ensure the connector is fully seated to avoid intermittent charging caused by a loose connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



