We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 6.5 ft power cord

WAWEIS

WAWEIS 12V AC/DC Adapter for Nitecore TM11 TM15 TM26 TM28 TM36

SKU CH-QWZT-GA9JE

12 V AC/DC adapter with 100–240 V input, 6.5 ft cord and FCC, CE, RoHS certification powers Nitecore TM11, TM15, TM26, TM28, TM36 flashlights

  • World-wide 100-240 V input works on any mains supply
  • 5 ft power cord gives flexible placement
  • Four protection circuits guard against over-current, over-voltage, short-circuit and total-power faults
  • FCC, CE and RoHS certifications confirm safety compliance
  • 100 % compatible replacement for Nitecore TM11, TM15, TM26, TM28, TM36, QuadRay MT25, MH40, MH25 and Thor flashlights

Compatible Nitecore Flashlights

This 12V AC/DC adapter replaces the original charger for Nitecore TM11, TM15, TM26, TM28 and TM36 models. It also supports the QuadRay MT25, MH40 25 Thor and Tiny Monster rechargeable flashlights. The unit delivers a direct power source for these specific high-output LED lights. Builders needing a different voltage or connector type should look elsewhere.

Thermal And Safety Protections

The adapter operates on worldwide 100-240VAC input at 50/60Hz without external cooling. Integrated safeguards include over-current protection, over-voltage protection, total power protection and short-circuit protection. A smart chip adds overheating protection while anti-interference isolation materials reduce electrical noise. Users requiring active fan cooling or liquid-cooling compatibility will not find it here.

Six-Point-Five-Foot Cord And Certifications

A single 6.5 Ft power cord provides reach from a wall outlet to the flashlight without extension leads. The package carries FCC, CE and RoHS certifications confirming compliance with safety and environmental standards. No additional software, mounting brackets or alternative cable lengths are included. Buyers needing a shorter cable or a multi-port charging hub must source those separately.

Highlights

  • World-wide 100-240 V input works on any mains supply
  • 5 ft power cord gives flexible placement
  • Four protection circuits guard against over-current, over-voltage, short-circuit and total-power faults
  • FCC, CE and RoHS certifications confirm safety compliance
  • 100 % compatible replacement for Nitecore TM11, TM15, TM26, TM28, TM36, QuadRay MT25, MH40, MH25 and Thor flashlights

Specifications

No published specifications for this item yet.

Questions about this item

How do I plug the WAWEIS 12V adapter into the Nitecore TM26 flashlight, and what step do people forget?

Connect the barrel plug to the flashlight charging port, then plug the AC cord into a 100-240VAC 50/60Hz outlet; the step people forget is ensuring the barrel seats fully so the 6.5 Ft cord does not pull loose during charging.

What part of this charger will need replacement first under normal use?

The 6.5 Ft AC power cord and barrel connector see the most mechanical stress; the internal smart chip and protection circuits are solid-state and typically outlast the cord.

Which protection limit activates first when the TM36 draws maximum current for a long period?

Over current protection trips before over voltage or short-circuit safeguards, cutting output to prevent overheating while the adapter remains plugged into 100-240VAC mains.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.