WAWEIS
WAWEIS 12V AC adapter for Seagate Pushbutton Backup ST3300601U2-RK ST3300801CB-RK ST3250601U2-RK
12 V AC adapter powers Seagate Pushbutton Backup drives with 100–240 V input and 6.5 ft cord
- World-wide 100-240 V input works anywhere
- 5 ft power cord gives flexible placement
- Over-current, over-voltage and short-circuit protection keep hardware safe
- FCC, CE and RoHS certifications confirm compliance
- 100 % compatible with Seagate Pushbutton Backup models ST3300601U2-RK, ST3300801CB-RK, ST3250601U2-RK
Purpose-built 12 V replacement
This 12 V AC adapter is a direct replacement for Seagate Pushbutton Backup drives ST3300601U2-RK, ST3300801CB-RK and ST3250601U2-RK. It restores power to the original external hard-disk enclosure when the factory supply is lost or damaged.
Cord length and safety certifications
A 6.5 ft total cord length gives flexible desk placement without strain on the barrel connector. The unit carries FCC, CE and RoHS certification and includes over-current, over-voltage, short-circuit and total-power protection circuits.
Universal input and thermal protection
World-wide 100-240 VAC 50/60 Hz input allows use on any mains supply without a separate voltage selector. Smart-chip overheating protection and anti-interference isolation keep the adapter running cool and stable during continuous backup sessions.
Highlights
- World-wide 100-240 V input works anywhere
- 5 ft power cord gives flexible placement
- Over-current, over-voltage and short-circuit protection keep hardware safe
- FCC, CE and RoHS certifications confirm compliance
- 100 % compatible with Seagate Pushbutton Backup models ST3300601U2-RK, ST3300801CB-RK, ST3250601U2-RK
Specifications
No published specifications for this item yet.
Questions about this item
What input voltage range does the 12 V adapter accept?
The adapter accepts a world-wide input of 100-240 VAC at 50/60 Hz, so it works on mains supplies anywhere without a separate voltage selector.
What is the total length of the power cord supplied with this adapter?
The charger ships with a single 6.5 ft long power cord that combines the mains lead and the DC output cable in one piece.
How do you connect the adapter to a Seagate Pushbutton Backup drive?
Plug the barrel connector firmly into the drive's power socket until it seats, then connect the mains plug to a wall outlet; the common mistake is leaving the barrel plug slightly loose, which causes intermittent power.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



