We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 12V AC adapter with 6.5 Ft cord

WAWEIS

WAWEIS 12V AC Adapter for Paslode PI-41-691US CF325LI

SKU CH-WTXJ-E1T0N

Replacement 12 V AC adapter with 6.5 ft cord and multiple safety protections for Paslode CF325LI nailers

  • World-wide 100–240 V input suits any mains supply
  • 5 ft cord gives flexible placement on site
  • FCC CE RoHS certified for electrical safety
  • Over-current over-voltage short-circuit protection guards the tool
  • Smart-chip thermal and overload safeguards protect battery health

Power compatibility

This 12 V AC adapter replaces the original Paslode PI‑41‑691US charger for the CF325LI Impulse framing nailer. It accepts worldwide input from 100 to 240 VAC at 50 or 60 Hz, so the tool can be charged on any standard mains supply. The unit carries FCC, CE and RoHS certifications for electrical safety and environmental compliance. It is built with new components and matches the original device specifications exactly.

Upgrade scenarios

The adapter replaces lost, damaged or worn‑out OEM chargers identified by part numbers such as 902000, 900507, 900600, 900420, 902664, 902654, 902600, 902666, 900200, 900506 and 035460. Swapping to this unit is worthwhile when the original cable is frayed, the plug no longer seats securely, or the charger fails to maintain a full charge cycle. It is not suitable for users who need a higher‑voltage supply or a different connector type for other tool platforms.

Installation and pitfalls

Simply plug the adapter into a mains outlet and connect the output to the nailer’s charging port; the 6.5 ft cord gives ample reach without extension leads. Built‑in protections guard against over‑current, over‑voltage, short‑circuit and total‑power faults, while a smart chip monitors temperature during charging. Common issues arise only if the mains voltage falls outside the 100‑240 VAC range or if the connector pins are bent, preventing a secure mating with the tool.

Highlights

  • World-wide 100–240 V input suits any mains supply
  • 5 ft cord gives flexible placement on site
  • FCC CE RoHS certified for electrical safety
  • Over-current over-voltage short-circuit protection guards the tool
  • Smart-chip thermal and overload safeguards protect battery health

Specifications

No published specifications for this item yet.

Questions about this item

Does the 6.5 ft cord reach a standard wall outlet from a workbench?

The 6.5 ft power cord connects the adapter to a 100-240VAC 50/60Hz wall outlet, providing enough length for typical workbench placement.

How do I connect the adapter to my Paslode CF325LI nailer?

Plug the adapter's output connector into the nailer's charging port and the input plug into a 100-240VAC outlet; the step often missed is ensuring the connector seats fully before charging begins.

Will the FCC, CE and RoHS certified adapter need any periodic maintenance?

No user maintenance is required; the unit includes over current, over voltage, short circuit and overheating protection, so it operates until replacement is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.