We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 2.1 by 5.5mm barrel plug and 6.5ft cord

WAWEIS

WAWEIS 12V 1.0A AC Adapter 2.1x5.5mm 6.5ft

SKU CH-BGBG-B2VCB

A 12 V 1.0 A AC adapter with 2.1 × 5.5 mm tip and 6.5 ft cord, compatible with Q-See QS12500MA and QM6006B security cameras, includes over-current, over-voltage and short-circuit protection

  • World-wide 100-240 VAC input works across regions
  • 5 ft cord gives flexible placement
  • Multiple safety protections guard connected equipment
  • FCC, CE and RoHS certifications confirm compliance
  • 12 V 1.0 A output matches listed device requirements

Replacement 12V 1.0A Adapter

This 12V 1.0A AC adapter replaces the original power supply for Q-See QS12500MA and QM6006B security cameras. It delivers 12.0V output with a 2.1mm x 5.5mm barrel tip and includes a 6.5 Ft power cord. World wide input voltage of 100-240VAC 50/60Hz allows use in different regions. Safety features include over current, over voltage, short circuit and total power protection.

Upgrade from lower-rated supplies

The adapter covers a 500mA to 1000mA range, so it replaces units rated at 0.5A or 1.0A without mismatch. The jump is worth it when the original charger is lost, damaged or shows overheating protection faults. FCC, CE and RoHS certifications confirm compliance with recognised safety standards. A smart chip provides overload and anti-interference protection during operation.

Check tip polarity and voltage

Verify that the camera requires 12VDC centre-positive polarity and a 2.1mm x 5.5mm connector before ordering. Confirm the device label shows a current draw between .5A and 1.0A to match the adapter rating. Ensure the 6.5 Ft cable length reaches the mounting location without strain. The unit is sold as the adapter only; no extra cables or mounting hardware are included.

Highlights

  • World-wide 100-240 VAC input works across regions
  • 5 ft cord gives flexible placement
  • Multiple safety protections guard connected equipment
  • FCC, CE and RoHS certifications confirm compliance
  • 12 V 1.0 A output matches listed device requirements

Specifications

No published specifications for this item yet.

Questions about this item

Will the 2.1 x 5.5 mm barrel plug fit my Q-See QS12500MA or QM6006B camera?

Yes, the 2.1 x 5.5 mm tip matches the DC input on the listed Q-See models, so the connector seats correctly without an adapter.

What is the correct way to connect the 6.5 ft cord so the camera powers on reliably?

Plug the AC side into a 100-240 VAC 50/60 Hz outlet first, then insert the DC barrel into the camera; reversing the order can trigger the short-circuit protection and prevent startup.

Which components should I check if the adapter stops delivering 12 V 1.0 A after extended use?

Inspect the DC cable for kinks near the barrel, verify the AC prongs are not loose, and replace the unit if the over-voltage or over-current protection has tripped permanently.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.