We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black wall adapter with a 6.5 ft cord

WAWEIS

WAWEIS 12V 0.5A AC Adapter 6.5 Ft Cord

SKU CH-HB2E-FSBVR

A 12 V 0.5 A AC adapter with a 6.5 ft cord, 100–240 V input and FCC, CE, RoHS certifications

  • World-wide 100-240 VAC input works anywhere
  • 5 ft power cord gives flexible placement
  • FCC CE RoHS certifications confirm safety standards
  • Over-current over-voltage short-circuit protections guard equipment
  • 12 V 0.5 A output matches Lorex ACCMIC1 microphone requirements

Power for Lorex audio accessories

This 12 V 0.5 A adapter replaces the original supply for the Lorex ACCMIC1 indoor audio microphone used with surveillance DVR and CCTV systems. It delivers 12.0 V DC at 500 mA and carries FCC, CE and RoHS certifications. The 6.5 ft power cord gives flexible placement around the recorder.

Simple plug-in installation

The unit accepts 100-240 V AC at 50/60 Hz worldwide, so no voltage selector is needed. Connect the barrel plug to the microphone and the mains lead to a wall outlet. Built-in over-current, over-voltage, short-circuit and total-power protection guards both the adapter and the connected device.

Check connector polarity and device rating

Verify that the microphone requires 12 V DC at 0.5 A with a centre-positive barrel connector before ordering. The adapter is not suitable for equipment needing higher current such as 1 A models or different voltage levels. Ensure the mains plug matches your local socket type.

Highlights

  • World-wide 100-240 VAC input works anywhere
  • 5 ft power cord gives flexible placement
  • FCC CE RoHS certifications confirm safety standards
  • Over-current over-voltage short-circuit protections guard equipment
  • 12 V 0.5 A output matches Lorex ACCMIC1 microphone requirements

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the adapter is delivering the correct 12V 0.5A output after plugging it in?

The green LED on the adapter body lights solid when mains power is present; measure 12.0 V DC at the barrel tip with a multimeter to verify the rated 0.5 A output.

What comes in the box and which cables or tips must be purchased separately?

The package contains the 12V 0.5A adapter with an integrated 6.5 Ft cord and fixed barrel connector; no extra cables or interchangeable tips are included.

Which version should I choose for a Lorex ACCMIC1 microphone that needs 12VDC 500mA?

Select the 12V 0.5A model — it matches the 12VDC 500mA requirement and the 6.5 Ft cord length listed for the ACCMIC1 accessory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.