WAWEIS
WAWEIS 120W 19V 6.32A AC/DC Adapter Compatible with Samsung Odyssey NP800G5M-X01US
120W 19V 6.32A AC/DC adapter with 10 ft cord and FCC, CE, RoHS certifications
- World-wide 100-240 V input works anywhere
- 120 W at 19 V 6.32 A powers the laptop fully
- 10 ft total cord length reaches distant outlets
- FCC CE RoHS certified with multiple safety protections
- 100 % compatible replacement for Samsung Odyssey NP800G5M-X01US
120W 19V AC Adapter
This 120-watt AC/DC adapter delivers 19 volts at 6.32 amps for the Samsung Odyssey NP800G5M-X01US laptop. It replaces the original charger with full OEM compatibility. The unit accepts worldwide input voltage from 100 to 240 VAC at 50 or 60 Hz. A ten-foot power cord provides generous reach from the wall outlet.
Capacity and headroom
Rated at 120 watts, the adapter supplies ample power for charging the battery while the system runs typical workloads. Continuous loads approaching the maximum rating may cause the brick to warm noticeably. The built-in overload and over-current protections will trip if demand exceeds the design limit. It is not intended for laptops that require higher wattage or a different voltage.
Input range and protection limits
The wide 100 to 240 VAC input covers mains supplies in most countries without a voltage selector. Safety certifications include FCC, CE and RoHS compliance. Over-voltage, short-circuit and over-temperature circuits protect both the adapter and the connected notebook. The fixed 19-volt output cannot be adjusted for other devices.
Highlights
- World-wide 100-240 V input works anywhere
- 120 W at 19 V 6.32 A powers the laptop fully
- 10 ft total cord length reaches distant outlets
- FCC CE RoHS certified with multiple safety protections
- 100 % compatible replacement for Samsung Odyssey NP800G5M-X01US
Specifications
No published specifications for this item yet.
Questions about this item
Will this 19V 6.32A adapter run my older Samsung Odyssey NP800G5M-X01US if the original charger was rated at a lower wattage?
Yes, the 120W output matches the laptop's requirement; the adapter only supplies the current the system draws, so a higher-wattage unit works safely with the original hardware.
How can I verify the adapter is delivering the correct 19V 6.32A after I plug it in?
The laptop's battery indicator will show charging, the power LED on the adapter tip lights up, and the system reports AC power in the OS battery settings.
Does the package include both the wall cable and the DC cable, or must I buy a mains lead separately?
The box contains the adapter brick with an attached 10 ft DC cable and a detachable AC mains cord, so no extra purchase is needed for standard use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



