We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 6.5 ft power cord and barrel connector

WAWEIS

WAWEIS 10V AC/DC adapter for Brady HandiMark TLS2200

SKU CH-D5H3-3NA89

A 10 V replacement charger for the Brady HandiMark TLS2200 label printer with 100–240 V input and a 6.5 ft cord

  • World-wide 100–240 V input works across regions
  • 5 ft cord gives flexible placement
  • FCC, CE and RoHS certified for safety
  • Multiple protections guard against over-voltage, over-current and short circuits
  • 10 V 110 mA output matches Brady HandiMark TLS2200 requirements

Replacement power supply for Brady HandiMark TLS2200

This 10 V DC adapter replaces the original charger for the Brady HandiMark TLS2200 label printer. It delivers 110 mA output from a 100-240 V AC input, matching the factory voltage and current specifications. The unit is new and built to meet OEM compatibility requirements for the listed device.

Upgrade from a lost or damaged original charger

When the original power supply is missing or no longer functions, this adapter restores full operation without modification. The 6.5 ft power cord provides the same reach as the factory cable. The jump is worth it whenever the printer cannot run on batteries alone and a direct mains connection is required.

Limited to devices that accept 10 V DC at 110 mA

The barrel connector and fixed 10 V output suit only equipment rated for that exact voltage and current. It cannot power devices needing higher amperage or a different voltage. The 100-240 V AC input covers global mains standards, but the DC side remains fixed for the HandiMark TLS2200 series.

Highlights

  • World-wide 100–240 V input works across regions
  • 5 ft cord gives flexible placement
  • FCC, CE and RoHS certified for safety
  • Multiple protections guard against over-voltage, over-current and short circuits
  • 10 V 110 mA output matches Brady HandiMark TLS2200 requirements

Specifications

No published specifications for this item yet.

Questions about this item

What connector does the WAWEIS adapter use for the Brady HandiMark TLS2200?

The adapter plugs directly into the Brady HandiMark TLS2200 printer's DC input jack; the 6.5 ft cord reaches the wall outlet.

How is the WAWEIS 10V adapter installed, and what step is often missed?

Connect the barrel plug to the HandiMark TLS2200 power port, then plug the AC cord into a 100-240VAC 50/60Hz outlet; ensure the plug is fully seated.

When will the WAWEIS charger need replacement?

The unit is built with overload, over-voltage, short-circuit and overheating protection; replace it if the smart chip signals a fault or output stops.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.