WAWEIS
WAWEIS 10Ft 19.5V 4.62A 90W AC Adapter
A 90 W laptop charger with a 10 ft cord and worldwide 100–240 V input, certified to FCC, CE and RoHS
- Extra reach with a 10 ft power cord
- 90 W output at 19.5 V and 4.62 A for reliable charging
- Worldwide 100-240 VAC input handles any mains supply
- Multiple safety protections include over-current, over-voltage and short-circuit
- FCC, CE and RoHS certified for compliance
90 W replacement adapter
The WAWEIS 19.5 V 4.62 A unit delivers 90 W for compatible Dell XPS laptops including the XPS 14, XPS 15 and models such as L502x, L521x and L702x. It matches the original voltage and current specification so the notebook charges at the intended rate. A 10 ft total cord length gives extra reach between the wall outlet and the desk. The adapter accepts 100–240 VAC at 50/60 Hz for worldwide use.
Built-in safety protections
Over current, over voltage, short circuit and total power protection circuits guard the laptop and the adapter itself. Overheating protection uses a smart chip to regulate temperature during extended charging sessions. High-quality wires and improved isolation materials reduce electromagnetic interference. The unit carries FCC, CE and RoHS certifications confirming compliance with international safety and environmental standards.
Upgrade from shorter or damaged units
This adapter replaces a lost, frayed or too-short original charger and restores full charging performance. The 10 ft cable solves reach problems when the nearest socket is far from the workspace. Buyers who need a higher wattage rating or a different connector type should verify their laptop's requirements before ordering. The 12 month warranty period covers manufacturing defects on the new component.
Highlights
- Extra reach with a 10 ft power cord
- 90 W output at 19.5 V and 4.62 A for reliable charging
- Worldwide 100-240 VAC input handles any mains supply
- Multiple safety protections include over-current, over-voltage and short-circuit
- FCC, CE and RoHS certified for compliance
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 10Ft cord to my Dell XPS 15 L502x and what step is often missed?
Plug the barrel tip firmly into the laptop's DC jack until it clicks, then connect the mains lead to the IEC C5 inlet on the brick and into a 100-240VAC 50/60Hz wall socket; the step often missed is seating the IEC C5 connector fully so the brick receives power.
What part of this 90W 19.5V 4.62A adapter will need replacement first?
The IEC C5 mains lead or the DC output cable typically wears first from repeated bending; the brick itself has over-current, over-voltage, short-circuit and thermal protections that extend its service life.
What limit appears first when this charger runs continuously at full 90W load?
Thermal protection activates first if the brick cannot dissipate heat, causing a temporary shutdown until the smart chip senses a safe temperature; adequate airflow prevents this.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



