We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 10ft power cord

WAWEIS

WAWEIS 10Ft 12V AC/DC Adapter for Buffalo LinkStation LS-WXL 2TB

SKU CH-T4D3-1K2TE

12V AC/DC adapter with 10ft cord replaces Buffalo LinkStation LS-WXL power supply

  • World-wide 100-240 V input suits global use
  • 10 ft cord gives flexible placement options
  • Multiple safety protections guard against electrical faults
  • FCC, CE and RoHS certifications confirm compliance standards
  • 100 % compatible replacement for listed Buffalo models

Replacement AC Adapter for Buffalo LinkStation

This 12 V DC power adapter replaces the original supply for Buffalo LinkStation LS-WXL 2 TB network storage units. It accepts worldwide mains input from 100 to 240 VAC at 50 or 60 Hz and delivers a 10 ft power cord for flexible placement. Safety certifications include FCC, CE and RoHS, with built-in over-current, over-voltage, short-circuit and total power protection.

Suitable for owners of compatible LinkStation models

The adapter fits the LS-WX2.0TL/R1, LS-WXL R1 and R1-EU variants and the Micros Fidelio KDS Controller using part numbers 700876-210 and 700876-215. It is not intended for devices that require a different voltage, connector polarity or higher current rating. Buyers needing a supply for other Buffalo NAS models or non-12 V equipment should look elsewhere.

12 V output with 10 ft reach

The unit provides a steady 12 V DC output suitable for the listed LinkStation Duo enclosures and the Fidelio controller. The 10 ft cable gives ample slack for desk or rack positioning without extension cords. Protection circuits guard against overload, overheating and interference. It will not power devices that demand more than the rated 12 V supply or a different connector type.

Highlights

  • World-wide 100-240 V input suits global use
  • 10 ft cord gives flexible placement options
  • Multiple safety protections guard against electrical faults
  • FCC, CE and RoHS certifications confirm compliance standards
  • 100 % compatible replacement for listed Buffalo models

Specifications

No published specifications for this item yet.

Questions about this item

What devices does the 12V adapter replace for the LinkStation LS-WXL 2TB?

It replaces the original power supply for Buffalo LinkStation Duo models LS-WX2.0TL/R1, LS-WXL R1, LS-WXL R1-EU and Micros Fidelio KDS controllers 700876-210 and 700876-215.

Will the 10 ft cord reach a wall socket if the NAS sits on a high shelf?

The total cord length is 10 ft, giving extra reach compared with shorter factory cables so a high shelf placement is practical.

How do I confirm the adapter is delivering power to the NAS after connecting it?

The NAS front-panel power LED will illuminate and the drives will spin up, showing the 12VDC output is active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.