We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 12V AC adapter with 10ft power cord

WAWEIS

WAWEIS 10Ft 12V AC Adapter for Vaddio Clearview HD-18 HD-18W

SKU CH-4HNV-P6K8E

10 ft 12 V AC/DC adapter powers Vaddio Clearview HD-18 PTZ cameras with worldwide 100-240 V input and FCC, CE, RoHS certification

  • 10 ft cable reaches distant outlets easily
  • 12 V output powers Vaddio Clearview HD-18 cameras
  • 100-240 V input works worldwide
  • FCC, CE and RoHS certified for safety
  • Over-current, over-voltage and short-circuit protection included

10 ft 12 V AC adapter for Vaddio Clearview HD-18

This 12 V DC power supply replaces the original adapter for Vaddio Clearview HD-18 and HD-18W PTZ cameras. It accepts worldwide 100-240 V AC input at 50 or 60 Hz and delivers a 10 ft total cord length for flexible placement. The unit is new and carries FCC, CE and RoHS certifications.

Replaces lost or damaged OEM power supplies

The adapter is a direct replacement for Vaddio part numbers 999-6900-000, 999-6900-000W, 999-6900-001 and 999-6900-001W. It restores power when the original supply fails, is misplaced or shows signs of wear. The jump is worth it when the camera cannot operate from its existing brick or when a longer 10 ft reach simplifies installation.

Verify camera model and voltage before ordering

Confirm the camera is a Clearview HD-18 or HD-18W and that it requires 12 V DC input. Check the connector polarity and dimensions against the original supply to ensure a proper fit. The adapter is not suitable for cameras that use a different voltage or connector type. Buyers who need a multi-voltage or higher-wattage unit should look elsewhere.

Highlights

  • 10 ft cable reaches distant outlets easily
  • 12 V output powers Vaddio Clearview HD-18 cameras
  • 100-240 V input works worldwide
  • FCC, CE and RoHS certified for safety
  • Over-current, over-voltage and short-circuit protection included

Specifications

No published specifications for this item yet.

Questions about this item

What length is the power cord on this 12 V adapter for the Vaddio Clearview HD-18?

The cord measures 10 ft from end to end, giving plenty of reach for ceiling or wall-mounted PTZ cameras.

How do I connect the adapter to the Vaddio Clearview HD-18 and what step is often missed?

Plug the barrel connector firmly into the camera's 12 VDC input until it clicks, then connect the IEC lead to a 100-240 VAC outlet; the click is the step many users skip.

Which safety components inside the adapter may need replacement after a surge event?

The internal fuse and MOV-based over-voltage protection are sacrificial; if a large surge trips them the adapter must be replaced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.