Wavlink WNAP570B AC600 outdoor access point
Dual-band outdoor access point with PoE, IP67 weatherproofing, and two detachable 7 dBi antennas for gardens, farms, or campsites
- ColorWhite
- Standards801_11_AC
- Wireless Data Rates450 megabits_per_second
- Frequency Banddual_band
- Channels801_11_AC, dual_band
- Mounting LocationOutdoor
- IP67 weatherproof enclosure withstands rain, dust and extreme temperatures from -10°C to 50°C
- Dual-band AC600 delivers combined 600 Mbps with 450 Mbps on 5 GHz and 150 Mbps on 2.4 GHz
- Two detachable 7 dBi high-gain antennas extend long-range outdoor coverage for gardens and farms
- Power over Ethernet supports passive PoE and 802.3at/af active PoE for single-cable installation
- Four operation modes — Repeater, Router, AP and AP+Repeater — adapt to any network requirement
AC600 outdoor access point
The Wavlink WNAP570B is a dual-band wireless access point built for permanent outdoor installation. It targets users who need reliable Wi-Fi across gardens, farms, yards or campsites where indoor routers cannot reach.
PoE-powered IP67 enclosure
The unit replaces cabling runs to outdoor power sockets by accepting passive PoE or standard 802.3at/af active PoE over a single Ethernet cable. The jump is worth it when mains power is unavailable or trenching is impractical, and the IP67-rated housing survives rain, dust and temperatures from -10°C to 50°C.
600 Mbps combined throughput
Combined wireless rates reach 600 Mbps with 450 Mbps on 5 GHz and 150 Mbps on 2.4 GHz, served by two detachable 7 dBi antennas. This handles web browsing, IP cameras and streaming for multiple users, but saturates when several high-bitrate streams or large file transfers run simultaneously.
Highlights
- IP67 weatherproof enclosure withstands rain, dust and extreme temperatures from -10°C to 50°C
- Dual-band AC600 delivers combined 600 Mbps with 450 Mbps on 5 GHz and 150 Mbps on 2.4 GHz
- Two detachable 7 dBi high-gain antennas extend long-range outdoor coverage for gardens and farms
- Power over Ethernet supports passive PoE and 802.3at/af active PoE for single-cable installation
- Four operation modes — Repeater, Router, AP and AP+Repeater — adapt to any network requirement
Specifications
| Brand | Wavlink |
|---|---|
| Series | WAVLINK |
| Model | AC600 |
| Part Number | WNAP570B |
| Color | White |
| Standards | 801_11_AC |
| Wireless Data Rates | 450 megabits_per_second |
| Frequency Band | dual_band |
| Channels | 801_11_AC, dual_band |
| Mounting Location | Outdoor |
| Modulation | 801_11_AC |
| MIMO | 1 x AC600 Outdoor WiFi Extender |
| Compliance | not_applicable |
| Dimensions | 28 in. x 28 in. x 25 in. |
| Features | false |
| Disclaimer | not_applicable, 1 Year Warranty |
Questions about this item
What mounting hardware is required for the 28-inch enclosure?
The unit measures 28 in. x 28 in. x 25 in. and is designed for outdoor mounting; use the included pole-mount brackets and stainless-steel straps to secure it to a mast or wall.
How do I power the device using the supplied PoE injector?
Connect the injector LAN port to your switch, the injector PoE port to the extender LAN/PoE port with a single Ethernet cable, then plug the injector into mains power; the extender supports both passive PoE and 802.3at/af active PoE.
When should I replace the two 7 dBi detachable antennas?
Inspect the antenna connectors and radomes annually; replace an antenna if the radome is cracked, the connector is corroded, or signal strength drops noticeably after severe weather.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



