We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal 19-inch rackmount switch with 24 front RJ45 ports and indicator LEDs

Wavlink

Wavlink WL-NW2422GP 24-port Gigabit PoE+ network switch 250W

SKU CH-BANH-N7XX4

24-port Gigabit PoE+ switch with 250W budget, 2 RJ45 uplinks, 2 SFP slots and 4 selectable DIP modes

  • Switch Typeunmanaged
  • StandardsIEEE802.3af/at
  • Uplink Ports2
  • Uplink InterfaceRJ45
  • Uplink Speed10/100/1000 Mbps
  • Primary Ports24 x RJ45 + 2 x SFP

Port 24 Port

  • Powers 24 devices up to 30W each with 250W total budget
  • Four combinable DIP modes adapt to surveillance, VLAN, or aggregation needs
  • Built-in overload and short-circuit protection keeps connected gear safe
  • 2 SFP slots plus 2 RJ45 uplinks give flexible 1000Mbps backbone links
  • Plug-and-play 19-inch rackmount design requires no configuration to start

24-port Gigabit PoE+ switch for surveillance

The Wavlink WL-NW2422GP is an unmanaged switch with 24 PoE+ RJ45 ports that supply up to 30W each within a 250W total budget. Two Gigabit RJ45 uplinks and two 1000Mbps SFP slots provide flexible uplink paths for IP cameras, wireless access points and VoIP phones. Four hardware DIP switches let you enable VLAN isolation, CCTV extend mode, PD-ALIVE auto-reboot or port aggregation without any software configuration.

Suits installers who need simple PoE power

This switch fits rack-mounted surveillance racks and small business cabinets where plug-and-play deployment is required and VLAN segmentation or 250 metre camera reach are handled by DIP toggles. It does not serve buyers who need a managed web interface, SNMP monitoring, link aggregation control protocol or per-port power scheduling. Environments that demand more than 250W of PoE budget or 10G uplink speeds must look at a different class of switch.

250W PoE budget across 24 ports is the deciding

Every connected device draws from the shared 250W pool and no single port can exceed 30W, so the maximum number of powered devices depends on their individual power class. If the total load of cameras, access points and phones stays within 250W the switch powers them all; otherwise some ports will be denied power by the built-in priority protection.

Highlights

  • Powers 24 devices up to 30W each with 250W total budget
  • Four combinable DIP modes adapt to surveillance, VLAN, or aggregation needs
  • Built-in overload and short-circuit protection keeps connected gear safe
  • 2 SFP slots plus 2 RJ45 uplinks give flexible 1000Mbps backbone links
  • Plug-and-play 19-inch rackmount design requires no configuration to start

Specifications

BrandWAVLINK
ModelWL-NW2422GP
Part Number24 * 10/100/1000Mbps adaptive RJ45 port
2 * 10/100/1000Mbps RJ45 uplink port
2 * 1000Mbps fiber optic module slot
Switch Typeunmanaged
StandardsIEEE802.3af/at
Uplink Ports2
Uplink InterfaceRJ45
Uplink Speed10/100/1000 Mbps
Primary Ports24 x RJ45 + 2 x SFP
Management FeatureSupports IEEE802.3af/at standard;
The maximum output power of a single PoE port can reach 30W;
Supports port overload protection, short circuit protection, and PoE port priority;
Ensure a data transmission and power supply distance of 100 meters;
Supports IEEE802.3x full duplex flow control and Backpressure half duplex flow control;
Provide VLAN isolation, CCTV network extension PD-ALIVE? One click aggregation of four dialing modes, which can be freely combined and activated. VLAN isolation and CCTV network extension shutdown are in standard mode;
Panel indicator lights monitor the w
VLAN SupportYes
PoE Ports24
PoE Power Budget250W
Max Power Consumption30W

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much heat or fan noise should I expect from the WL-NW2422GP when all 24 PoE+ ports are running at full load for a full day?

The switch draws up to 280W total system power with a 250W PoE budget, so sustained full load will generate noticeable heat; it uses internal cooling fans that become audible in quiet rooms, so place it in a ventilated rack or cabinet rather than on a desk.

What cabling and powered devices must I already have to use the 24 PoE+ ports and the two SFP slots on this switch?

You need Cat5e or better Ethernet cables for the 24 RJ45 PoE+ ports and the two Gigabit RJ45 uplinks, plus IEEE 802.3af/at compliant devices such as IP cameras, wireless APs or VoIP phones; the two SFP slots require separate 1000Mbps fibre transceivers and matching fibre patch leads.

Will the WL-NW2422GP work reliably with older 10/100 Mbps cameras or access points that I want to keep using?

Yes, every RJ45 port auto-negotiates down to 10 or 100 Mbps and still delivers PoE power under the 30W per-port limit, while the CCTV Extend DIP mode can push data and power up to 250 metres at 10 Mbps for legacy long-run cameras.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.