Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939809BTC
In stock
Watts
Watts 263A 1/4 in 1-25 psi Pressure Regulator
A brass pressure regulator with 1/4 in FNPT connections adjusts water pressure from 1 to 25 psi for commercial or residential use
- TypeOther
- Adjustable 1–25 psi range suits low-pressure systems
- Brass body resists corrosion for long service life
- Lead-free construction meets potable-water standards
- 300 psi maximum rating handles supply surges safely
- 140 °F temperature limit covers typical hot-water lines
Watts 263A brass pressure regulator
The Watts 263A is a lead-free brass pressure regulator designed for commercial and residential plumbing systems. It controls downstream pressure between 1 and 25 psi with FNPT connections on both inlet and outlet.
Pressure adjustment range 1 to 25 psi
This single specification decides whether the part matches the system design. The regulator holds outlet pressure anywhere in that band while withstanding up to 300 psi inlet pressure and fluid temperatures up to 140 degrees F.
Quarter-inch FNPT ports fit standard pipe threads
The 1/4 in FNPT inlet and outlet thread directly into matching pipe fittings without adapters. A 1/4 in gauge port allows pressure monitoring. Buna-N seals and brass body suit potable water applications where lead-free compliance is required.
Highlights
- Adjustable 1–25 psi range suits low-pressure systems
- Brass body resists corrosion for long service life
- Lead-free construction meets potable-water standards
- 300 psi maximum rating handles supply surges safely
- 140 °F temperature limit covers typical hot-water lines
Specifications
| Brand | WATTS |
|---|---|
| Type | Other |
Questions about this item
What does the 1 to 25 psi adjustment range mean for my water system?
The regulator can be set to deliver any outlet pressure between 1 and 25 psi, protecting downstream fixtures from higher supply pressure.
How does the FNPT connection type limit installation options?
The 1/4 inch female NPT threads accept matching male NPT fittings; other thread standards will not seal without adapters.
What clearance does the 4 3/8 inch height and 2 1/8 inch length require?
Allow at least 4 3/8 inches vertical space and 2 1/8 inches horizontal run for the brass body and adjustment knob.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
