We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass pressure reducing valve with union connections, half-inch size

Watts

Watts 1/2 LF 25 AUB Z3 Pressure Reducing Valve 1/2 In. 25-75 psi

SKU CH-9V20-E6G4F MPN 1/2

Reduces incoming water pressure to a preset 50 psi, adjustable from 25 to 75 psi, with lead-free brass construction and an integrated strainer

  • TypeDrain Components
  • Lead-free brass construction meets potable-water standards
  • Factory preset at 50 psi for immediate installation
  • Adjustable range 25 to 75 psi matches system needs
  • Built-in strainer protects valve from debris
  • Rated to 300 psi and 160 °F for durability

Lead-Free Brass Pressure Reducing Valve

The Watts 1/2 LF 25 AUB Z3 reduces incoming water pressure to a preset 50 psi, adjustable between 25 and 75 psi. Its lead-free brass body meets ASSE 1003, ANSI A112.26.2, CSA B356 and MIL-V-18146B Type 1 standards. A built-in strainer protects the seat from debris. Connection is FNPT union by FNPT for 1/2 inch pipe.

Upgrade from Fixed or Non-Strainer Valves

Replace a preset-only regulator when site pressure varies or when code requires field adjustment. The 25 to 75 psi range covers most residential and light commercial supplies. The integral strainer adds protection that basic valves lack, reducing service calls caused by sediment fouling the seat.

Straightforward Union Installation

The FNPT union ends allow the valve body to be removed without cutting pipe. Install horizontally with the arrow pointing downstream and leave clearance for the 7 inch height. Common issues are reversed flow direction, overtightening the union nuts and failing to flush lines before startup, which can lodge debris in the strainer.

Highlights

  • Lead-free brass construction meets potable-water standards
  • Factory preset at 50 psi for immediate installation
  • Adjustable range 25 to 75 psi matches system needs
  • Built-in strainer protects valve from debris
  • Rated to 300 psi and 160 °F for durability

Specifications

TypeDrain Components
BrandWatts
Model1/2 LF 25 AUB Z3

Questions about this item

Will the 1/2 inch FNPT union connections fit my existing copper piping?

The valve uses 1/2 inch FNPT union by FNPT connections, so it threads directly onto 1/2 inch male NPT fittings or copper male adapters without extra unions.

How do I adjust the pressure from the factory 50 psi preset and what is the common mistake?

Turn the adjustment screw clockwise to raise pressure up to 75 psi or anticlockwise to lower to 25 psi; the common mistake is adjusting without a downstream gauge, so you set it blind.

The built-in strainer is mentioned — does it need regular cleaning and how often?

Yes, the integral strainer should be inspected and flushed periodically; frequency depends on local water debris, but many plumbers check it during annual whole-house pressure tests.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.