We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black SFP+ transceiver module with LC duplex connector, labelled WG8583

WatchGuard

WatchGuard WG8583 10GBase-SR SFP+ video accessory

SKU CH-BQN5-H51CQ MPN WG8583

A 10 Gb short-range SFP+ transceiver for WatchGuard Firebox M470 M570 M670 M4600 M5600 firewalls

  • TypeSFP+
  • Connectors1 x 10GBase-SR 1 x 10GBase-SR Network
  • Weight0.25
  • 10 Gbps short-range fibre uplink for Firebox M appliances
  • SFP+ form factor plugs directly into M470 M570 M670 M4600 M5600
  • 25 kg module keeps rack weight low
  • Optical 10GBase-SR interface for multimode links
  • WatchGuard branded transceiver ensures vendor-qualified operation

10GBase-SR SFP+ Transceiver

The WatchGuard WG8583 is a 10GBase-SR SFP+ transceiver designed for optical networking. It connects compatible WatchGuard Firebox M series appliances to short-range fibre links. The module provides a single 10GBase-SR network interface for high-speed data transfer. It is intended for administrators expanding 10 Gigabit Ethernet connectivity within supported firewall platforms.

Low-Power Optical Module

The transceiver operates as a passive optical component with minimal power draw and no moving parts. Silent operation is inherent because the unit lacks fans or active cooling. Thermal output remains negligible during normal network traffic. The lightweight design at 0.25 weight units adds no measurable strain to the host chassis.

Firebox M Series Compatibility

This module upgrades Firebox M470, M570, M670, M4600 and M5600 models with 10 Gigabit short-range fibre capability. The jump is worthwhile when existing copper uplinks saturate or when linking switches across fibre runs. It does not suit appliances outside the listed Firebox M family or deployments requiring long-range single-mode optics.

Highlights

  • 10 Gbps short-range fibre uplink for Firebox M appliances
  • SFP+ form factor plugs directly into M470 M570 M670 M4600 M5600
  • 25 kg module keeps rack weight low
  • Optical 10GBase-SR interface for multimode links
  • WatchGuard branded transceiver ensures vendor-qualified operation

Specifications

BrandWatchGuard
TypeSFP+
Connectors1 x 10GBase-SR 1 x 10GBase-SR Network
Weight0.25
Shipping weight0.45 kg
Package size99 × 86 × 51 mm

Questions about this item

How do I install the WG8583 SFP+ module into a Firebox M470 and what step is often missed?

Insert the transceiver into an SFP+ cage until it clicks, then connect the LC duplex fibre patch cord; the step often missed is removing the dust caps from both the module and the cable before linking them.

What maintenance or replacement will the WG8583 need over time?

The optical interfaces should be cleaned with a lint-free swab and isopropyl alcohol whenever fibres are disconnected; the module itself has no moving parts and typically only requires replacement if the laser degrades after years of service.

Which limit appears first on the WG8583 during sustained 10GBase-SR traffic?

The optical link budget of the 10GBase-SR interface determines the maximum usable fibre length, and signal attenuation over distance is the first constraint encountered under continuous load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.