We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wall-mounted polished chrome towel warmer with 14 flat bars, hardwired, 47.6 inches high

WarmlyYours

WarmlyYours Milan 14 Towel Warmer Polished Hardwired 14 Bars

SKU CH-M21Y-0YRT0

Wall-mounted towel warmer with 14 polished stainless-steel bars, 734 BTU/h output and hardwired 120 VAC connection for a clean installation

  • FinishPolished Chrome
  • TypeTowel Bars
  • Warms up to three large towels with 14 heated bars
  • Reaches max temperature in 15 to 20 minutes
  • Hardwired 120 VAC connection hides all wires
  • cULus listed with TempSmart overheat protection at 149°F
  • 734 BTU per hour output from 215 watts

Milan 14 Towel Warmer — What It Is

The Milan 14 is a wall-mounted towel warmer finished in polished chrome with 14 heated flat bars made from 304 stainless steel. It operates on a hardwired 120 VAC connection and delivers 734 BTUs per hour at 215 watts. The unit reaches its maximum surface temperature of 149°F (65°C) in 15 to 20 minutes and includes built-in TempSmart overheat protection for safety.

Upgrade From Basic Rails

This warmer replaces standard towel bars or simple heated rails that lack sufficient bars or heat output to dry multiple large towels quickly. The jump is worth it when you need to warm up to three large towels or bathrobes at once and want a flat-bar design that maximises surface area for faster drying. The integrated power switch with indicator light adds convenient control that basic models often omit.

Hardwired Installation Notes

Installation requires a hardwired electrical connection, so a qualified electrician is recommended to ensure compliance with local codes and to conceal wiring behind the wall. The unit measures 47.6 in high, 20.4 in wide and 4.3 in deep, so verify stud spacing and clearance before mounting. The cULus listing confirms safety certification, but buyers who cannot run a dedicated 120 VAC line or who prefer a plug-in model should consider other options.

Highlights

  • Warms up to three large towels with 14 heated bars
  • Reaches max temperature in 15 to 20 minutes
  • Hardwired 120 VAC connection hides all wires
  • cULus listed with TempSmart overheat protection at 149°F
  • 734 BTU per hour output from 215 watts

Specifications

FinishPolished Chrome
TypeTowel Bars

Questions about this item

What wall clearance and stud spacing does the 47.6-inch high by 20.4-inch wide unit need?

The Milan 14 measures 47.6 in high, 20.4 in wide and 4.3 in deep; mount it to wall studs spaced for the 20.4-inch width and allow at least the 4.3-inch projection from the wall surface.

Which step is most often missed when hardwiring the 120 VAC connection?

Installers frequently forget to fit a dedicated 120 VAC junction box behind the unit before securing the towel warmer, leaving no approved enclosure for the hardwired splice.

How should the 304 stainless steel bars and TempSmart overheat protection be maintained over time?

Wipe the polished 304 stainless bars with a soft cloth and mild cleaner; the integrated TempSmart limiter (max 149 °F / 65 °C) requires no user service — if it ever trips, the unit must be replaced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.