Walter Surface Technologies
Walter Surface Technologies 13C170 Crimped Wire Mounted Brush
A crimped-wire mounted brush for die grinders removes rust, scale and paint from metal surfaces
- TypeAbrasive Finishing Tools
- Designed for die grinders to clean metal surfaces efficiently
- High-density crimped wires remove scale rust and paint quickly
- Oil-hardened tempered wires deliver durability across various metals
- Industrial abrasive brush built for surface preparation tasks
- Model 13C170 identifies this Walter finishing tool
Industrial Surface Preparation
This crimped wire mounted brush by Walter Surface Technologies is built for metal surface preparation using a die grinder. It removes scale, rust and paint from various metallic surfaces with high-density crimped wires made from oil-hardened and tempered steel. The design targets fast material removal in industrial finishing tasks.
Die Grinder Mounting
The brush mounts directly onto a compatible die grinder for immediate use. Operators must verify spindle size and speed rating match the tool before installation. Running the brush above its rated speed or on an undersized spindle can cause wire breakage and unsafe operation.
Abrasive Finishing Limits
Performance depends on the die grinder’s output and the workpiece material. Aggressive use on hardened alloys may reduce wire life, while light pressure extends it. The brush is not suited for non-metallic surfaces or precision polishing that requires finer abrasive media.
Highlights
- Designed for die grinders to clean metal surfaces efficiently
- High-density crimped wires remove scale rust and paint quickly
- Oil-hardened tempered wires deliver durability across various metals
- Industrial abrasive brush built for surface preparation tasks
- Model 13C170 identifies this Walter finishing tool
Specifications
| Type | Abrasive Finishing Tools |
|---|---|
| Brand | Walter Surface Technologies |
Questions about this item
How can I confirm the 13C170 brush is running correctly on my die grinder?
The high-density crimped wires should remove scale, rust and paint quickly without excessive vibration when the die grinder reaches operating speed.
What comes with the 13C170 and what must I supply?
The mounted brush itself is included; a compatible die grinder is required separately to drive it.
Which version of the 13C170 should I choose for general metal preparation?
The single 13C170 model with oil-hardened tempered wires is built for general-purpose cleaning and fast material removal on metallic surfaces.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
