Video Mount Products
Video Mount Products ERRS1032-50 Rack Screws 50 Pack
- 0.43
$8.99
0.00010595BTC
In stock
Wall Control
Wall Control 35-P-3248GY Grey Steel Pegboard Panel 32x48in
A 32-by-48-inch grey steel pegboard panel with round and slotted holes on one-inch centres, 20-gauge thickness, 200-pound panel capacity and 600-pound total capacity.
- Weight18.4
- Holds up to 200 lb per panel for heavy tool storage
- Three panels combine for 600 lb total unit capacity
- Powder-coated steel resists corrosion in garage environments
- 32 x 48 in dimensions provide 10 sq ft of organised wall space
- Includes mounting hardware for immediate installation
Steel Pegboard Panel 32x48in
This Wall Control panel provides 10 sq ft of slotted storage area on a single usable side. The grey powder-coated steel construction supports a 200 lb panel load capacity. Mounting hardware is included for immediate installation.
Suits garages and workshops needing high-density
Builders requiring a 600 lb whole unit load capacity across three panels can combine units. Buyers who want integrated hooks or a finished frame should look at alternative systems.
20-gauge steel thickness determines rigidity
The 20 ga panel thickness governs resistance to bowing under the rated 200 lb load. Thinner gauges would flex; thicker gauges add weight without increasing the stated capacity.
Highlights
- Holds up to 200 lb per panel for heavy tool storage
- Three panels combine for 600 lb total unit capacity
- Powder-coated steel resists corrosion in garage environments
- 32 x 48 in dimensions provide 10 sq ft of organised wall space
- Includes mounting hardware for immediate installation
Specifications
| Brand | WALL CONTROL |
|---|---|
| Weight | 18.4 |
Questions about this item
How much weight can the 1/4 in peg holes and 1 in spacing support across the 32x48 in panel?
The panel is rated for 200 lb load capacity across its 10 sq ft surface, with round and slotted holes spaced 1 in apart for accessory mounting.
What framing or wall structure is required to mount a 32 in by 48 in steel panel weighing 18.4 lb?
The 20 ga steel panel measures 3/4 in deep and includes mounting hardware; secure it to studs or solid blocking using the supplied fasteners for the 600 lb whole-unit rating.
How are the three panels aligned and fastened so the 1 in peg spacing stays continuous?
Mount each 32x48 in panel side by side, using the included hardware to anchor every panel to studs; verify hole alignment before final tightening to keep the 1 in grid uniform.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
