Hollaender
Hollaender 70-7 External Coupling Aluminum 1.25 in storage shed
- 0.38
$10.99
0.00013089BTC
In stock
Wall Control
Wall Control 35-P-3248BK Pegboard Panel 32x48 in
Steel pegboard panel with round quarter-inch holes on one-inch centres holds 200 lb per panel and includes mounting hardware
- Weight19.75
- Holds 200 lb per panel for heavy tools
- 600 lb total capacity across three panels
- 10 sq ft of organised storage space
- Powder-coated steel resists rust and wear
- Mounting hardware included for quick installation
32 x 48 in steel pegboard panel
This Wall Control panel measures 32 inches high by 48 inches wide and provides 10 square feet of usable storage area. It is built from 20-gauge steel with a black powder-coated finish and uses round holes spaced one inch apart. The panel suits garages, workshops or sheds where tools need visible organisation.
200 lb per panel and 600 lb total capacity
Each of the three panels supports up to 200 pounds, giving the assembled unit a 600-pound whole-unit load capacity. The 20-gauge steel and powder coating resist deformation under sustained weight, so heavy hand tools and power equipment remain secure over time. Mounting hardware is included for a rigid installation.
Check wall structure and accessory compatibility
Verify that the mounting surface can carry the combined 600-pound rating and that fasteners suit the wall material. The peg holes are round and spaced on a one-inch grid, so hooks and bins must match 1/4-inch pegs at that spacing. The panel depth is 3/4 inch, so allow that clearance from the wall.
Highlights
- Holds 200 lb per panel for heavy tools
- 600 lb total capacity across three panels
- 10 sq ft of organised storage space
- Powder-coated steel resists rust and wear
- Mounting hardware included for quick installation
Specifications
| Brand | WALL CONTROL |
|---|---|
| Weight | 19.75 |
Questions about this item
Will the 20-gauge steel panel vibrate or transmit noise when loaded to its 200 lb per-panel capacity?
The 20-gauge steel construction with powder-coated finish is rigid and silent; it has no moving parts, so it produces no vibration or noise even when fully loaded.
What wall structure and tools are needed to mount the three included panels?
Mounting hardware is included; you must supply a drill, appropriate anchors for studs or masonry, and a level to secure the panels to a wall that can support 600 lb total.
Can standard 1/4-inch pegboard hooks be used with the 1-inch hole spacing on these panels?
Yes, the panels feature round 1/4-inch holes on a 1-inch grid, which matches standard pegboard hook dimensions for direct compatibility.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
