We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue PCI-E GPU riser with 0.6m USB 3.0 cable and SATA to 6-pin power adapter

Vszerda

Vszerda Ver006 PCI-E GPU Riser 1X to 16X Blue 0.6M USB 3.0 Cable SATA to 6Pin Power

SKU CH-WN3H-WG2EA

Connects a graphics card to a 1x PCI-E slot using a 23.6-inch USB 3.0 cable with three solid capacitors and a SATA to 6-pin power adapter for stable 16A delivery

  • Extends GPU reach with 23.6-inch USB 3.0 cable
  • Independent power via 15-pin SATA to 4-pin adapter
  • 16A capacity removes load from motherboard
  • Three solid capacitors stabilise voltage and protect against over-current
  • Fits 1x through 16x PCI-E slots with side clamps

PCI-E 1X to 16X riser for mining rigs

This GPU riser kit adapts a single PCI-E 1X slot into a 16X physical connector for graphics cards. It targets builders of Ethereum or altcoin miners, from small open-pit frames to large rack-mounted farms. The blue Ver006 version includes side clamps to secure additional cards without extra hardware. It is not suited for systems that require native 16X electrical bandwidth.

0.6 m USB 3.0 link with 15-pin SATA power

The 23.6-inch cable uses double shielding, braid plus aluminium foil, for stable data transmission at USB 3.0 speeds. Three solid capacitors on the riser board provide voltage stabilisation and over-current protection. A 15-pin SATA to 4-pin power cord delivers up to 16A, making GPU power independent of the motherboard. Builders needing longer reach or ATX-sourced GPU power must source different cables.

Bundled SATA power cable shifts load off motherboard

The included 15-pin SATA to 4-pin wire feeds the graphics card directly from the power supply, removing the draw from the motherboard slot. This reduces thermal stress on the board and improves stability in dense mining configurations. Rigs that rely on motherboard-only power or lack spare SATA connectors cannot use this kit without adapters.

Highlights

  • Extends GPU reach with 23.6-inch USB 3.0 cable
  • Independent power via 15-pin SATA to 4-pin adapter
  • 16A capacity removes load from motherboard
  • Three solid capacitors stabilise voltage and protect against over-current
  • Fits 1x through 16x PCI-E slots with side clamps

Specifications

No published specifications for this item yet.

Questions about this item

Will this riser fit a PCI-E 1x slot on an older motherboard?

It is compatible with 1x, 2x, 4x, 8x and 16x PCI-E motherboard slots.

How can I verify the 3 FP solid capacitors are stabilising voltage for my GPU?

The capacitors provide voltage stabilisation and over-current protection; stable GPU operation under load confirms they are working.

Does the kit include the 23.6-inch USB 3.0 cable and the 15-pin SATA to 4-pin power cord?

Yes, both the double-shielded USB 3.0 cable and the 15-pin SATA to 4-pin power cord are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.