Vszerda
Vszerda USB-C to USB-B 2.0 printer cable 6.6 ft 3-pack black
Three cables connect USB-C laptops to USB 2.0 Type-B printers, scanners and MIDI gear at 480 Mbps over 6.6 ft
- Connect USB-C laptops to USB 2.0 Type-B printers, scanners and MIDI gear
- 480 Mbps High-Speed data transfer for reliable wired syncing
- 6 ft length gives flexible desk placement for each cable
- Three-cable pack covers multiple devices or provides spare leads
- Works with MacBook Pro, MacBook Air, XPS 13, XPS 15, Surface Book 2 and other USB-C hosts
USB-C to USB-B 2.0 printer cable 3-pack
This three-pack supplies 6.6 ft USB-C male to USB-B 2.0 male cables for connecting modern USB-C laptops to legacy USB-B peripherals. Each cable handles data at up to 480 Mbps and is intended for printers, scanners, MIDI controllers, audio interfaces and similar devices. The USB-C plug fits Thunderbolt 3 ports on compatible hosts. The cables are not designed to deliver meaningful power to attached equipment.
Replaces USB-A to USB-B links on USB-C only hosts
The cables substitute a traditional USB-A to USB-B connection when the host computer lacks a USB-A port. The upgrade is worthwhile when a MacBook Pro 2017‑2020, MacBook Air 2017‑2020, Dell XPS 13 or 15, Surface Book 2, Chromebook Pixel, iMac 2017, iMac Pro, Yoga 910, Zen AiO, MateBook, Spectre x360 or similar USB-C host must drive a USB 2.0 Type-B printer, scanner or MIDI device. They do not serve hosts that only offer USB-A or micro-USB ports.
Check the device port is USB 2.0 Type-B before
Verify that the peripheral presents a standard USB 2.0 Type-B female socket — not USB 3.1 Type-B, Mini-USB or Micro-USB. Confirm the host provides a USB-C or Thunderbolt 3 port; the cable will not work direct from an Android USB-C phone or tablet to a printer. Windows tablets with USB-C are supported. No driver installation is required for the cable itself.
Highlights
- Connect USB-C laptops to USB 2.0 Type-B printers, scanners and MIDI gear
- 480 Mbps High-Speed data transfer for reliable wired syncing
- 6 ft length gives flexible desk placement for each cable
- Three-cable pack covers multiple devices or provides spare leads
- Works with MacBook Pro, MacBook Air, XPS 13, XPS 15, Surface Book 2 and other USB-C hosts
Specifications
No published specifications for this item yet.
Questions about this item
Does the 6.6 ft length reach a printer across a typical desk?
Yes, the 6.6 ft cable spans most desk-to-printer distances without tension.
Which end plugs into the MacBook Pro and which end plugs into the printer?
The USB-C male connector goes into the MacBook Pro; the USB 2.0 Type-B male connector goes into the printer.
Will the USB 2.0 Type-B connector wear out from frequent unplugging?
The connector is rated for standard USB 2.0 mating cycles; replace the cable if the port feels loose or data drops occur.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



