We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB-C to SATA 22-pin adapter cable 25cm

Vszerda

Vszerda USB-C to SATA 22-pin adapter cable 25cm for 2.5" SSD

SKU CH-7SSS-VAPT5

Connects a 2.5" SATA drive to a USB-C port at up to 5Gbps with hot-swap support

  • TypeUSB
  • Connector TypeUSB Type C
  • ColorBlack
  • Connector Number22
  • Connector DetailUSB Type C
  • Terminal GenderMale-to-Female
  • Up to 5 Gbps transfer speed with USB-C 3.0
  • Connect 2.5" SATA SSD via 22-pin adapter
  • Hot-swap and plug-and-play convenience
  • Works with USB 1.0, 1.1, 2.0 and SATA 1.5 Gbps
  • Compact 25 cm cable for portable use

USB-C to SATA adapter for 2.5" drives

This Vszerda adapter connects a 2.5-inch SATA SSD or hard drive to a USB-C port on a laptop or desktop. It uses a 22-pin SATA connector and a 25-centimetre cable to provide a direct data link. The SuperSpeed USB-C interface supports transfer rates up to 5Gbps. Hot-swapping and plug-and-play operation are supported without additional drivers.

Suits laptop upgrades and data recovery.

The cable is designed for 2.5-inch mass-storage-class drives that draw power from the USB port. It does not work with 3.5-inch disks, which require a separate power source. Builders needing to connect larger desktop drives should look at a different solution. The adapter is backward compatible with USB 1.0, 1.1 and 2.0 ports as well as SATA 1.5Gb/s drives.

Deciding spec: 22-pin SATA connector for 2.5" only

The single specification that determines fit is the 22-pin SATA connector built for 2.5-inch drives. This connector carries both data and power, so no external supply is needed for compatible SSDs or laptop hard disks. If the target drive uses a different connector or form factor, this adapter will not attach.

Highlights

  • Up to 5 Gbps transfer speed with USB-C 3.0
  • Connect 2.5" SATA SSD via 22-pin adapter
  • Hot-swap and plug-and-play convenience
  • Works with USB 1.0, 1.1, 2.0 and SATA 1.5 Gbps
  • Compact 25 cm cable for portable use

Specifications

Brandxiwai
TypeUSB
Connector TypeUSB Type C
ColorBlack
Connector Number22
Connector DetailUSB Type C
Terminal GenderMale-to-Female
Speed5 gigabits_per_second
ConstructionCopper
FeaturesData Transfer

Questions about this item

What does the 5 Gbps figure mean when the adapter is connected to a 2.5" SSD?

The 5 Gbps is the peak bandwidth of the USB-C link; the drive itself will run at its own SATA speed, so a SATA III SSD tops out at 6 Gbps on the drive side but cannot exceed the 5 Gbps USB-C ceiling.

Which USB and SATA revisions does the 22-pin connector support, and what is the practical limit?

The cable is compliant with USB 3.0 at 5 Gbps and SATA revision 3.0 at 6 Gbps, backward compatible with USB 2.0, 1.1, 1.0 and SATA 1.5 Gbps; the USB-C link remains the bottleneck at 5 Gbps.

What physical clearance and power does the 25 cm cable need for a 2.5" drive?

The 25 cm cable plugs directly into the 22-pin SATA data and power header on a 2.5" SSD; no extra power brick is required, and the drive must be a 2.5" form factor — 3.5" disks are not supported.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.