We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small USB-C solder connectors male and female with 18-pin PCB

Vszerda

Vszerda USB-C Solder Connector Male & Female 18-pin 10Gbps 65W 2pcs

SKU CH-DSNE-87R3B

DIY solder-type USB-C male and female connector pair with 18-pin PCB supporting 10 Gbps data and 65 W power delivery

  • TypeUSB2.0
  • Connector TypeUSB2.0
  • Connector Number1
  • Connector DetailUSB2.0
  • Terminal GenderUSB Type-C Male & Female
  • SpeedUSB Type-C Male & Female
  • Solder-your-own design demands manual soldering skill
  • Reversible USB-C plugs fit phones and laptops
  • 18-pin PCB supports 10Gbps data and 65W power
  • Delivers up to 20V 3.25A for 65W devices
  • Backward compatible with USB 3.0, 2.0 and 1.1 speeds

DIY USB-C Solder Connector Kit

This two-piece set provides a USB Type-C male plug and a female socket, each mounted on an 18-pin printed circuit board for hand soldering. It is intended for engineers, hobbyists or repair technicians who build custom cables or replace damaged ports on laptops, tablets or phones. Proficiency in manual soldering is required to use the connectors.

Sustained Power and Data Handling

The PCB pinout supports up to 65 W of power delivery at 20 V 3.25 A when paired with a compatible 65 W source and device, allowing continuous charging during operation. Data throughput is rated at 10 Gbps under the USB 3.1 specification, with backward compatibility to USB 3.0, USB 2.0 and USB 1.1 speeds for legacy peripherals.

18-Pin PCB Pinout for Type-C

The decisive specification is the 18-pin board layout that breaks out the full Type-C 10 Gbps and 65 W capability for soldering. Builders who need a ready-made cable assembly or a connector without soldering will not be served by this kit.

Highlights

  • Solder-your-own design demands manual soldering skill
  • Reversible USB-C plugs fit phones and laptops
  • 18-pin PCB supports 10Gbps data and 65W power
  • Delivers up to 20V 3.25A for 65W devices
  • Backward compatible with USB 3.0, 2.0 and 1.1 speeds

Specifications

Brandxiwai
ModelCN-036-XY
TypeUSB2.0
Connector TypeUSB2.0
Connector Number1
Connector DetailUSB2.0
Terminal GenderUSB Type-C Male & Female
SpeedUSB Type-C Male & Female
Apple CompatibleUSB2.0
SpecificationsUSB2.0, CN-036-XY, xiwai, Laptop
FeaturesUSB2.0, Laptop
Disclaimernot_applicable

Questions about this item

How much power does the 18-pin PCB handle when running a 65W laptop all day?

The connector is rated for DC 20V 3.25A throughput with a 65W input, so it can sustain that load continuously as long as your solder joints and cable gauge are adequate.

What tools and parts must I already have to use these solder-type connectors?

You need a temperature-controlled soldering iron, fine solder, flux, wire strippers, and the cable you intend to terminate; the package only supplies the male and female plugs with the 18-pin PCB.

Will the 10Gbps-rated USB 3.1 interface work with my older USB 2.0 and USB 1.1 devices?

Yes, the connector is backward-compatible with USB 2.0 Hi-Speed at 480Mbps and USB 1.1 Low-Speed at 1.5Mbps, so legacy peripherals will function at their native speeds.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.