We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black USB-C male to 5-pin screw terminal cables, 30 cm each

Vszerda

Vszerda USB-C 2.0 male to 5-pin screw terminal cable 30 cm 2-pack

SKU CH-QW75-B2Q58

Connects a USB-C 2.0 device to five screw terminals using only a screwdriver and wire stripper, supplied as a 30 cm two-pack

  • Connector TypeUSB Type C
  • ColorMale
  • Connector DetailUSB Type C
  • Apple CompatibleLaptop
  • Constructioncopper
  • Screw-terminal design enables solder-free Type-C wiring with just a screwdriver and wire stripper
  • 5-pin bolt connector follows USB 2.0 Type-C pinout for reliable data and charge extension
  • 30 cm cable length adds flexible reach between host and custom terminal connections
  • AWG 28-16 wire range suits a broad variety of solid or stranded conductors
  • Two-cable pack provides a spare or supports dual-device installations

USB-C 2.0 male to 5-pin screw terminal

This cable converts a USB-C 2.0 male plug into a five-pin screw terminal block for DIY wiring. It suits installers and hobbyists who need a quick, solder-free connection to custom circuits or legacy equipment. The 30 cm length provides a short, tidy link for bench work or permanent fits. Supplied as a two-pack for spares or dual runs.

Thermals noise and power draw

Passive construction means no fan noise and no active cooling requirement. Power delivery follows the USB 2.0 specification so current stays within the port's rated limit. Copper conductors and a shielded jacket keep resistive loss low across the 30 cm run. The plastic and metal housing remains cool during normal charging or data use.

Sustained load behaviour

The screw terminals accept wire from AWG 28 to 16 for a secure mechanical joint that resists vibration. Continuous data or charging sessions hold stable because the connector follows the USB-C wiring standard. No solder joints to fatigue, so reliability depends only on terminal tightness and cable strain relief. The fixed 30 cm cable length prevents excess slack that could snag in long-term installations.

Highlights

  • Screw-terminal design enables solder-free Type-C wiring with just a screwdriver and wire stripper
  • 5-pin bolt connector follows USB 2.0 Type-C pinout for reliable data and charge extension
  • 30 cm cable length adds flexible reach between host and custom terminal connections
  • AWG 28-16 wire range suits a broad variety of solid or stranded conductors
  • Two-cable pack provides a spare or supports dual-device installations

Specifications

BrandzdyCGTime
Connector TypeUSB Type C
ColorMale
Connector DetailUSB Type C
Apple CompatibleLaptop
Constructioncopper

Questions about this item

How do I install the Vszerda USB-C 2.0 male to 5-pin screw terminal cable without soldering?

Strip each wire to the correct length, insert into the labelled terminals on the 5-pin block, tighten the screws with a small screwdriver, then plug the USB-C male end into the host port.

What maintenance will the screw terminals need after repeated wiring changes?

Re-tighten the terminal screws periodically and inspect the wire strands for fatigue; replace individual wires if the copper shows corrosion or breakage.

What limit appears first when using the 30 cm cable for continuous data and charging?

The AWG28-16 wire gauge and 2.0 specification cap sustained current and throughput, so voltage drop or speed loss will show before the 30 cm length becomes an issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.