We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal bracket with short black cable ending in USB-C port and internal motherboard connector

Vszerda

Vszerda USB 3.1 Type-E to USB-C 50 cm Front Panel Cable with PCIe Bracket

SKU CH-KM7T-ERH3P

Adds a front-panel USB-C port by converting a motherboard Type-E header, includes a full-height PCI bracket and 50 cm cable, supports up to 20 Gbps when the header provides USB 3.2 bandwidth

  • Connector NumberClassic
  • Apple CompatibleClassic
  • Specificationsmetal, 0.11 pounds, desktop computer, XRIKUI, Classic
  • Conductormetal
  • Constructionmetal
  • Add a USB-C port to connect phones, drives and hubs
  • 10 Gbps or 20 Gbps speeds with USB 3.1 and 3.2 backward compatibility
  • Plug into a motherboard Type-E header with no drivers needed
  • Metal shielding blocks EMI for stable data transfer
  • 50 cm cable on a full-height PCI bracket fits standard cases

Front-panel USB-C upgrade

This 50 cm cable adds a USB-C female port to a desktop by connecting to the motherboard USB 3.1 Type-E header. It is aimed at builders who want front-panel access for Type-C flash drives, phones or hubs without replacing the case. The full-height PCI bracket mounts in a standard expansion slot for a clean installation.

Thermals noise and power

The passive cable assembly draws no extra power and adds no active cooling, so system thermals and acoustic profile remain unchanged. Shielded construction with dual-layer EMI/EFI protection keeps signal integrity stable at the rated 10 Gbps or 20 Gbps link speeds. No driver is required, leaving CPU and chipset load unaffected.

Build integration

A motherboard USB 3.1 Type-E header is mandatory; the port will fall back to USB 2.0 or 3.0 speeds if the header is adapted from an older standard. The bracket fits only full-height slots, so mini-ITX or low-profile cases are not supported. The 50 cm length reaches front-panel cut-outs in typical ATX chassis while leaving internal routing flexible.

Highlights

  • Add a USB-C port to connect phones, drives and hubs
  • 10 Gbps or 20 Gbps speeds with USB 3.1 and 3.2 backward compatibility
  • Plug into a motherboard Type-E header with no drivers needed
  • Metal shielding blocks EMI for stable data transfer
  • 50 cm cable on a full-height PCI bracket fits standard cases

Specifications

BrandXRIKUI
ModelXRK012
Connector NumberClassic
Apple CompatibleClassic
Specificationsmetal, 0.11 pounds, desktop computer, XRIKUI, Classic
Conductormetal
Constructionmetal

Questions about this item

How do I install the Vszerda Type-E to USB-C front panel cable, and what step do people often miss?

Plug the Type-E male connector into the motherboard USB 3.1 Type-E header, then secure the full-height PCI bracket to the case rear slot; the step often missed is verifying the motherboard actually has a native Type-E port rather than a converted USB 2.0 or 3.0 header.

What maintenance or replacement will this cable need over time?

The cable itself has no moving parts and requires no scheduled maintenance; only replace it if the metal shielding is damaged, the Type-C female port becomes loose, or the 50 cm length no longer reaches the motherboard header after a case change.

What limit appears first under sustained high-speed transfers?

The bandwidth ceiling of the motherboard Type-E header — typically USB 3.1 or 3.2 — caps the Type-C port speed, so sustained throughput cannot exceed what that header provides.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.