We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda USB 3.1 Type-E to dual 9-pin header adapter with Type-A cable and PCBA

Vszerda

Vszerda USB 3.1 Type-E to 2×9-pin header hub adapter usb cable

SKU CH-8R99-NP0SY

Converts a motherboard USB 3.1 Type-E header into two 9-pin USB 2.0 ports with 480 Mbps speed and 500 mA each

  • Converts a 20-pin Type-E header to two 9-pin USB ports
  • Built-in USB 2.0 hub chipset delivers 480 Mbps per port
  • Each port supplies 500 mA at 5 V for reliable device power
  • Adhesive backing secures the adapter to the motherboard or chassis
  • Includes Type-E cable, Type-A cable and PCBA for immediate installation

USB 3.1 Type-E to dual 9-pin header adapter

This adapter converts a motherboard 20-pin USB 3.1 Type-E front-panel header into two standard 9-pin USB 2.0 headers. It includes a Type-E cable, a Type-A cable and a small PCBA with a USB 2.0 hub chipset. The assembly plugs directly into the motherboard and is secured with adhesive backing for a permanent internal fit.

Upgrade from single header to two USB 2.0 ports

The device is useful when a case provides more front-panel USB ports than the motherboard has native headers. It splits one Type-E connector into two 9-pin connections, each delivering up to 480 Mbps and 500 mA at 5 V. The jump is worth it when you need to connect both front-panel ports without sacrificing a rear I/O bracket or adding a PCIe card.

Check motherboard header type and case cable pinout

Verify the board has a 20-pin Type-E header and that your front-panel cables use standard 9-pin, 10-pin or 4-pin IDC connectors. The adapter only operates at USB 2.0 speeds despite the Type-E input, so devices requiring 5 Gbps or 10 Gbps will not reach those rates. Builders needing more than two ports or full USB 3.0 bandwidth should look elsewhere.

Highlights

  • Converts a 20-pin Type-E header to two 9-pin USB ports
  • Built-in USB 2.0 hub chipset delivers 480 Mbps per port
  • Each port supplies 500 mA at 5 V for reliable device power
  • Adhesive backing secures the adapter to the motherboard or chassis
  • Includes Type-E cable, Type-A cable and PCBA for immediate installation

Specifications

BrandVszerda

Questions about this item

Does the 20-pin Type-E plug on this adapter fit a standard motherboard USB 3.1 front-panel header?

Yes, the Type-E connector is designed to plug directly into a 20-pin USB 3.1 front-panel header on the motherboard.

What is the common mistake when plugging the two 9-pin cables into the motherboard?

Reversing the 9-pin connectors on the USB 2.0 headers; the keyed pin must align with the missing pin hole on the board.

Will the adhesive pad on the PCBA hold the hub securely inside a metal chassis over time?

The supplied back glue is intended for direct fixing to the motherboard or chassis; clean the surface first for a lasting bond.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.