We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 15cm cable with dual Type-E sockets on one end and a 9-pin 10-pin motherboard header plug on the other

Vszerda

Vszerda USB 3.1 Type-E Dual Port to USB 2.0 9Pin 10Pin Header Adapter 15cm

SKU CH-3CY2-PZWND

Converts a motherboard USB 2.0 9-pin or 10-pin header into a dual-port USB 3.1 Type-E front-panel connector with 480 Mbps data

  • Cable Length15 centimeters
  • Length15 centimeters
  • Terminal GenderType-03
  • SpeedType-03
  • Specifications15, centimeters, UC-095-TC003-XY, xiwai, USB Mainboard HUB/D
  • FeaturesUSB Mainboard HUB/Device USB power bank USB SSD/HDD
  • Converts USB 2.0 9pin 10pin header to USB 3.1 Type-E front panel
  • Dual Type-E ports deliver up to 480Mbps data for SSD/HDD
  • 15cm cable fits directly without extra attachments
  • No audio, video, docking, PD power or DP alt mode supported
  • Works with USB 3.2 and 3.1 front panel header requirements

Vszerda USB 3.1 Type-E Header Adapter

This 15-centimetre adapter converts a motherboard USB 2.0 9-pin or 10-pin header into a dual-port USB 3.1 Type-E front-panel socket. It is aimed at PC builders whose chassis provides a modern USB-C front port but whose board only exposes legacy internal headers. The compact plug-in design requires no extra brackets or cables. Data runs at up to 480 megabits per second over the USB 2.0 electrical interface.

Passive adapter thermals and power

As a passive wiring harness the unit generates no measurable heat and adds no audible noise to the build. It draws no auxiliary power and does not support Power Delivery, DisplayPort alt mode, or any audio, video or docking functions. The 15-centimetre length keeps internal routing tidy without introducing signal-degrading excess cable.

Upgrade path and limits

The adapter lets a case with a USB 3.1 Type-E front connector work on a board that only offers USB 2.0 internal headers. It does not upgrade the electrical signalling to USB 3.1 or 3.2 speeds; throughput remains at USB 2.0 rates. Builders who need full 5-gigabit or 10-gigabit front-panel performance must use a motherboard with a native USB 3.1 or 3.2 header instead.

Highlights

  • Converts USB 2.0 9pin 10pin header to USB 3.1 Type-E front panel
  • Dual Type-E ports deliver up to 480Mbps data for SSD/HDD
  • 15cm cable fits directly without extra attachments
  • No audio, video, docking, PD power or DP alt mode supported
  • Works with USB 3.2 and 3.1 front panel header requirements

Specifications

Brandxiwai
ModelUC-095-TC003-XY
Cable Length15 centimeters
Length15 centimeters
Terminal GenderType-03
SpeedType-03
Specifications15, centimeters, UC-095-TC003-XY, xiwai, USB Mainboard HUB/Device USB power bank USB SSD/HDD
FeaturesUSB Mainboard HUB/Device USB power bank USB SSD/HDD

Questions about this item

How do I install the dual Type-E adapter onto a USB 2.0 9-pin or 10-pin motherboard header?

Align the keyed male housing with the front-panel header, press straight in until the latch clicks, then secure the bracket screw; the dual ports face outward for front-panel access.

What upkeep does the 15 cm adapter cable require over time?

No scheduled maintenance; if a port becomes loose or data drops below 480 Mbps, unplug, inspect for bent pins, and replace the cable assembly.

What throughput limit appears first during sustained transfers from an SSD or HDD?

The USB 2.0 header caps continuous throughput at 480 Mbps, so sustained reads or writes from a drive will not exceed that rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.