We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black USB-C plug with short cable leading to a rectangular board with two rows of gold pins, adhesive backing visible

Vszerda

Vszerda USB 3.1 Type-C to 2× USB 2.0 9/10-pin header adapter

SKU CH-3TNC-XAK5R

Converts a USB 3.1 Type-C port into two internal 9/10-pin USB 2.0 headers with a built-in hub chip running at 480 Mbps and 500 mA per port

  • Converts a USB 3.1 Type-C host into two USB 2.0 headers
  • Built-in USB 2.0 hub chipset delivers 480 Mbps per port
  • Each port supplies DC 5 V 500 mA for connected devices
  • Compact design plugs directly into headers without extra cables
  • Adhesive backing allows secure mounting on motherboard or chassis

USB-C to dual 9-pin header adapter

The Vszerda adapter converts a USB 3.1 Type-C host port into two USB 2.0 9-pin or 10-pin motherboard headers. It is designed for builders who need internal USB 2.0 connections from an external Type-C connector. The package includes the adapter, a cable and a small PCBA. It suits desktop systems where front-panel or internal USB 2.0 devices must be driven from a Type-C source.

Sustained 480 Mbps throughput with 500 mA per port

A USB 2.0 hub chipset inside the adapter limits each header to 480 Mbps, matching the USB 2.0 specification. The adapter supplies DC 5 V at 500 mA to each port continuously, so connected devices receive steady power during extended transfers. Because the link is bounded by USB 2.0 signalling, sustained loads do not exceed this rate and the hub does not negotiate higher speeds. Thermal behaviour is passive; the compact PCB has no active cooling and relies on chassis airflow.

Plug-in install with adhesive backing

The adapter plugs directly into a USB 3.1 Type-C port and the two 9-pin headers mate with standard motherboard connectors. Pre-applied glue on the back lets the PCBA stick to the motherboard or chassis, reducing cable strain in tight spaces. No drivers or extra power cables are required. Misalignment of the 9-pin or 10-pin header is the most common issue; pins must match the motherboard keying exactly or the connection will fail. The short tether cable limits routing flexibility in large cases.

Highlights

  • Converts a USB 3.1 Type-C host into two USB 2.0 headers
  • Built-in USB 2.0 hub chipset delivers 480 Mbps per port
  • Each port supplies DC 5 V 500 mA for connected devices
  • Compact design plugs directly into headers without extra cables
  • Adhesive backing allows secure mounting on motherboard or chassis

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or power draw should I expect from the adapter when both 9-pin headers are running all day?

The adapter uses a USB 2.0 HUB chipset limited to 480Mbps and supplies DC 5v 500ma per port, so total draw stays at or below 1 A and heat remains minimal.

What must my motherboard already provide for this adapter to work?

You need a free USB 3.1 Type-C host port on the motherboard or front-panel header; the adapter plugs directly into that port and requires no extra power cable.

Will the two 9-pin headers work with older USB 2.0 front-panel cables I already have?

Yes, each header is a standard 9-pin USB 2.0 connector, so existing front-panel cables or 10-pin to 9-pin adapters will plug in and run at 480Mbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.