We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with a USB-C port, two 20-pin headers and a Type-E connector

Vszerda

Vszerda USB 3.1 Gen1 Type-C & 19/20Pin to Dual 20Pin & Type-E Hub 5Gbps

SKU CH-5Z83-44JDY

Converts a motherboard Type-C or USB 3.0 header into dual 20-pin and Type-E ports at 5 Gbps using a GL3510 chipset, with optional SATA power for devices needing up to 2 A

  • Dual 20-pin & Type-E outputs from one Type-C or 19/20-pin header
  • GL3510 chipset delivers full 5 Gbps USB 3.1 Gen1 bandwidth
  • Optional SATA power adds up to 5 V 2 A for demanding drives
  • Single adapter replaces multiple cables for front-panel USB 3.0 devices
  • Compact PCBA design fits tight case spaces without extra brackets

Versatile USB 3.1 Gen1 hub for front-panel expansion

This Vszerda adapter converts a single motherboard USB-C or 19/20-pin header into two USB 3.0 20-pin ports and one Type-E port. The GL3510 chipset enables full 5 Gbps bandwidth utilisation across the connected devices. It suits builders adding front-panel USB ports or card readers to a desktop chassis.

Check header type and power needs before fitting

Verify that your motherboard provides either a USB-C header or a 19/20-pin USB 3.0 header matching the adapter input. An optional SATA power cable can supply up to 5 V 2 A for devices that draw more current than the header provides, such as a portable 2.5-inch drive.

Sustained 5 Gbps throughput with supplemental power

The GL3510 chipset maintains the 5 Gbps rate during extended transfers by using Multiple INs to keep the bus saturated. When the SATA power lead is connected, attached drives receive consistent 5 V 2 A current, preventing throttling or disconnects under heavy, continuous load.

Highlights

  • Dual 20-pin & Type-E outputs from one Type-C or 19/20-pin header
  • GL3510 chipset delivers full 5 Gbps USB 3.1 Gen1 bandwidth
  • Optional SATA power adds up to 5 V 2 A for demanding drives
  • Single adapter replaces multiple cables for front-panel USB 3.0 devices
  • Compact PCBA design fits tight case spaces without extra brackets

Specifications

No published specifications for this item yet.

Questions about this item

Does the adapter include the SATA power cable or do I need to buy it separately?

The adapter board is supplied alone; a SATA power cable must be sourced separately to deliver up to 5V 2A to the downstream ports.

Should I pick the Type-C or the 19/20-pin host connector for my motherboard?

Use whichever header your motherboard provides — the board accepts either a Type-C or a 19/20-pin USB 3.0 header as the upstream link.

Will the GL3510 chipset actually give me 5Gbps on both output ports at once?

The GL3510 uses Multiple INs to share the single 5Gbps USB 3.1 Gen1 uplink across the two 20-pin and Type-E outputs, so total throughput stays at 5Gbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.