We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black compact adapter with USB 3.1 front panel header and NVME M-Key card edge connector

Vszerda

Vszerda USB 3.1 20pin Front Panel Socket to NVME NGFF M-Key Express Card VL805 Adapter

SKU CH-ERRH-C6572

Converts a motherboard NVME slot to a USB 3.1 front-panel header at up to 5 Gbit/s

  • Connector TypeUSB Type C
  • ColorBLACK NVME CARD 5Gbps
  • Connector DetailUSB Type C
  • Constructioncopper
  • Adds a front-panel USB 3.1 header using an M-key NVME slot
  • Converts NVME interface to a 20-pin USB 3.1 connector at 5Gbps
  • VL805 controller enables USB 3.1 without a native motherboard header
  • Works with existing USB 3.0 20-pin headers for broad compatibility
  • Compact plug-in design installs directly with no extra parts needed

Vszerda USB 3.1 NVME Adapter

This Vszerda adapter converts an available NVME slot on a motherboard into a USB 3.1 front-panel header. It targets builders whose board lacks a native USB 3.1 header but who want to run a Type-C or Type-A port on the case front. The VL805 bridge handles the conversion without extra cables or power. It suits DIY upgrades where the M-key slot is free.

Thermals noise and power

The adapter draws power directly from the NVME slot and the 20-pin header, so no external supply is needed. Its copper construction and compact PCB keep heat low during normal 5Gbps transfers. No fan or active cooling is present, so operation stays silent. Power draw stays within the limits of the slot and header.

Build quality and connectors

The black PCB uses a USB 3.0 20-pin socket on one side and a USB 3.1 20-pin front-panel header on the other. It plugs straight into the motherboard NVME M-key slot and the case header without brackets. The direct-insert design saves space in tight chassis. Users gain a full USB 3.1 port for daily peripheral connections.

Highlights

  • Adds a front-panel USB 3.1 header using an M-key NVME slot
  • Converts NVME interface to a 20-pin USB 3.1 connector at 5Gbps
  • VL805 controller enables USB 3.1 without a native motherboard header
  • Works with existing USB 3.0 20-pin headers for broad compatibility
  • Compact plug-in design installs directly with no extra parts needed

Specifications

BrandVszerda
Connector TypeUSB Type C
ColorBLACK NVME CARD 5Gbps
Connector DetailUSB Type C
Constructioncopper

Questions about this item

How do I plug the Vszerda adapter into my motherboard’s USB 3.0 20-pin header and what is the step people often miss?

Insert the 20-pin connector into the motherboard’s USB 3.0 header, then seat the NGFF M-Key card into the NVME slot; the step often missed is securing the card with its mounting screw so the electrical contact stays firm.

What maintenance or replacement will the VL805 adapter need over time?

No routine maintenance is required; if the USB 3.1 front-panel port stops enumerating at 5 Gbps, reseat the NGFF card and check the 20-pin header for bent pins before considering replacement.

What limit appears first when the adapter runs sustained transfers at 5 Gbps?

The USB 3.1 Gen 1 signalling rate of 5 Gbps is the hard ceiling; sustained throughput will plateau at that link speed regardless of the NVME drive’s own capability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.