We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10cm USB 3.0 Type-A to Micro SATA 16-pin adapter with 90-degree angled connector

Vszerda

Vszerda USB 3.0 Type-A to Micro SATA 7+9 16Pin 1.8" SSD Adapter Cable 90° Angled 10cm

SKU CH-E8EY-BBYXF

Connects a 1.8" Micro SATA SSD to a USB 3.0 port with a 90° angled 10cm cable for 5Gbps data transfer and plug-and-play use

  • TypeUSB
  • ColorBlack
  • FeaturesAngled Connector
  • Connect 1.8″ Micro SATA SSDs via USB 3.0 Type-A
  • 5 Gbps peak transfer rate for fast data access
  • 90° angled connector eases tight installations
  • Hot-swap and plug-and-play support across Windows, Linux, macOS
  • Bus-powered design removes need for external power supply

Purpose and audience

This adapter cable lets you connect a 1.8 inch Micro SATA SSD or hard drive to a USB Type-A port on a laptop or desktop. It is aimed at technicians and hobbyists who need to recover data, clone drives or test bare 1.8 inch drives without installing them inside a chassis.

Build and daily use

The 10 cm cable has a 90 degree angled Micro SATA connector that reduces strain in tight drive bays or on crowded benches. A black PVC jacket protects the conductors and the bus-powered design means no separate power brick is needed for 1.8 inch drives that draw within the USB port’s current limit.

Check before you buy

Verify that your drive uses the 7+9 16 pin Micro SATA interface because standard 2.5 inch SATA or mSATA drives will not fit. Confirm the host system has a USB 3.0 Type-A port for full 5 Gbps speed; the cable will fall back to USB 2.0 or 1.1 speeds on older ports.

Highlights

  • Connect 1.8″ Micro SATA SSDs via USB 3.0 Type-A
  • 5 Gbps peak transfer rate for fast data access
  • 90° angled connector eases tight installations
  • Hot-swap and plug-and-play support across Windows, Linux, macOS
  • Bus-powered design removes need for external power supply

Specifications

BrandNGFF
TypeUSB
ColorBlack
FeaturesAngled Connector

Questions about this item

What is the maximum throughput of the USB 3.0 interface on this adapter?

The USB 3.0 interface reaches 5 Gbps super speed, while the SATA side supports Gen1 at 1.5 Gbps, Gen2 at 3.0 Gbps and Gen3 at 6 Gbps for 150, 300 and 600 MB/s respectively.

Which drive form factor and connector does this 16-pin cable accept?

It fits a 1.8 inch Micro SATA SSD with a 7+9 16-pin connector and a 90 degree angled plug.

How do I connect the adapter and what common step should I avoid?

Plug the USB Type-A end into the host, attach the angled Micro SATA connector to the 1.8 inch drive, and do not look for an external power supply because the adapter is bus powered.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.