We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White USB 3.0 keystone jack cable with Type A male to female connectors, 10 inch length

Vszerda

Vszerda USB 3.0 Keystone Jack Cable 10 inch M/F

SKU CH-67WN-QV75G

A 10-inch USB 3.0 keystone pigtail extends a Type-A port through a standard wall plate or patch panel

  • Cable Length10 inches
  • Length10 inches
  • Connector Number1
  • Specifications10, inches, POY-000083, Poyiccot
  • Conductorstone
  • Constructionstone
  • USB 3.0 speed up to 10 Gbps via keystone jack
  • Fits standard keystone wall plates and patch panels
  • White USB-A female to male connector for clean installs
  • 10 inch pigtail length suits tight cavity spaces
  • Connects hidden in-wall USB cable to devices in another room

Vszerda USB 3.0 Keystone Jack Cable

This Vszerda cable provides a USB 3.0 Type A male-to-female keystone jack pigtail measuring 10 inches. It installs into a standard keystone opening on a wall plate or patch panel. The white connector allows a USB cable to run behind the wall for a tidy installation. It is designed for extending a USB 3.0 connection through a fixed mounting point.

Installers needing a flush wall-plate USB 3.0 port

The cable suits technicians fitting a permanent USB 3.0 access point in structured cabling. It works where a printer or peripheral in one room connects to a computer in another via in-wall cabling. Buyers who need a longer cable run than 10 inches should look at a different length. Users requiring a different connector type or a non-keystone form factor will not be served by this specific part.

10-inch pigtail length for keystone mounting

The 10-inch (25 cm) pigtail length determines how far the male plug reaches from the wall plate into the cavity. This short reach is intended for connections immediately behind the mounting surface. If the equipment or patch panel sits further away, the pigtail will not bridge the gap. Verify the cavity depth before ordering to ensure the male connector reaches the target port.

Highlights

  • USB 3.0 speed up to 10 Gbps via keystone jack
  • Fits standard keystone wall plates and patch panels
  • White USB-A female to male connector for clean installs
  • 10 inch pigtail length suits tight cavity spaces
  • Connects hidden in-wall USB cable to devices in another room

Specifications

BrandPoyiccot
ModelPOY-000083
Cable Length10 inches
Length10 inches
Connector Number1
Specifications10, inches, POY-000083, Poyiccot
Conductorstone
Constructionstone
Disclaimernot_applicable
Electrical Outlet Plug Typeno_plug

Questions about this item

What comes in the box and what must I buy separately?

The box contains one 10 inch USB 3.0 keystone jack cable with a Type A male plug and a white female keystone jack. You will need a standard keystone wall plate or patch panel and a separate USB A to B cable to connect a printer.

Which version should I choose for a 10 Gbps link?

This single model POY-000083 is rated for USB 3.0 at 10 Gbps and is 10 inches long; there are no other capacity or speed variants listed.

What does the 10 Gbps rating mean when the cable is installed in a wall plate?

The 10 Gbps rating is the USB 3.0 interface maximum; actual throughput depends on the host controller, the connected device and the quality of the separate USB A to B cable you use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.